Computers & Internet Logo

Related Topics:

Posted on Sep 10, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Monitor shuts off during use

My BENQ FP72G starts fine but after 30 min turns off. I wait a few min, turn it on and it lasts about 10 min and turns its self off. This 10 min issue continues.I blew the little dust it had in it out but no change. Is it time to buy another one or is it fixable?

  • cunha Feb 13, 2009

    hi i have the BENQ FP72G.

    i bought it 3 years ago with warraty.

    the first year i only had it for two months and the monitor went black

    while i was looking through the net the power was still on.

    then got it back from the repairs shop and was working fine for another year. then the same thing again ,every year started doing this.

    in my last year of warranty i asked the rapairs person why.

    he said it just needed reseting!

    now its out of warranty can anyone tell me how can i reset it my self

    i would appreciate some help thank you

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 3,940 Answers
  • Posted on Sep 10, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: May 10, 2008
Answers
3940
Questions
0
Helped
1405331
Points
12062

3 years old and generally rated as a Mediocre monitor to begin with, I'd say I'd invest in a new monitor

Here are some replacement options:

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010190020%201309821311%204017&name=%24100%20-%20%24200

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Hi, my BenQ FP72G 17 inch LCD Monitor keeps auto-adjusting every 5 seconds and every now and then it will turn itself off and later go on again. Any help ?

Make sure the cables are in well with a good amount of slack, it can cause a problem if your power cable or computer to monitor cable is loose
0helpful
1answer
1helpful
1answer

Fuel pressure intermittently drops causing sputter and die.

check for 12v constant at your fuel pump if you are not getting that replace your relay.
if you are getting 12 volts at your fuel pump the fuel pump is possible to run tuel it gets warm then shut down to a lower rpm I would then replace the fuel pump
0helpful
1answer

Screen just went blank and power light stays

THE PWER TRANSFORMER MY NEED TO BE CHANGED, DUE TO A DECREASE IN AMPERAGE.
1helpful
1answer

Corolla shuts off during left hand turns and hard stops

Wow. These are tough to find unless you are willing to roll the car up on it's right side and then check the power to the system. ..
Look for loose connections going through things that might move or the wires connected to the starter (sometimes the power wire is connected to the battery line at the starter solenoid).
Could also be at the ignition switch.
0helpful
1answer

My Benq screen shuts down 10 seconds after switchung on

it may be overheat or check the cables it will properly connect or not(may be loose connection or damaged). 
click this link for more info
0helpful
1answer

Monitor

try by uninstalling the video driver from safe mode and reinstall the driver.if the problem persist then your monitor needs servicing
0helpful
1answer

Monitor blacks out after running for about 25 mins

Ok based on just the monitor turning off Lets try this,,
FOR WINDOWS XP
1.) Right click on your desktop
2.) Choose properties
3.) Click on the screen saver tab
4.) Click power
5.) Set The POWER SCHEME to Home/Office Desk
6.) Set the Turn Off monitor to Never
7.) Set the Turn Off hard disk and system Stand By to never
8.) Click apply then ok
9.) Repeat steps 1 - 3
10.) Set the wait time to 30 minutes
11.) Click Ok
12. Shut down and restart your system and wait 30 minutes to see if the monitor will shut off if it doesnt then Your good to go
If it does Then disable the screen saver.. and wait half hour to see what happens

POST BACK HERE AND TELL ME YOUR RESULTS OF THE ABOVE SO WE CAN TRY SOMETHING ELSE
0helpful
1answer

Benq LCD monitor

I had same problem. No Power at the monitor. what can I do?
Not finding what you are looking for?

251 views

Ask a Question

Usually answered in minutes!

Top BenQ Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Paul Bade

Level 3 Expert

1818 Answers

Jean Thiebaux

Level 2 Expert

164 Answers

Are you a BenQ Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...