Need help to get navigation working - Power Acoustik PTID-5850NR Car Video Player

Some help here, but you may need an auto electrician as they are very complex.

https://www.google.com/search?q=2003+Lincoln+Navigator+brake+lights+don%27t+work

..

GOOGLE...Shark Navigator manuals....you will find what
you are looking for.

Regards,
Dennis

Yes, helps to have power on all wires that need power. lol

If you need further help, reach me via phone at https://www.6ya.com/expert/lloyd_4256582adacd68ee

you need to add an exception for yahoo navigation to your firewall. that's why it's not working (at least that's what it sounds like) try and disable your firewall so you can verify that's the problem. if it is, simply go into firewall and click add an exception and navigate to the directory where yahoo navigation is stored.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

navigators are prone to debris getting stuck in the turbine and causing the unit to stop. Try clearing the turbine and try it again. Depending on the age of the unit, you could also be in need of a turbine kit. There are plastic bearings that hold the turbine and after time they will wear out and cause the unit to not move very well or move in circles. It will look like the pods are moving but since the turbine is not providing the normal range of movement, the unit will not work properly. Take the unit apart and inspect the turbine bearings and "A-Frame" bearings as well. If the bearings are damaged, you'll need to buy a "Turbine kit with a-frames". You should be able to install it yourself.

You need to contact the dealer for information on ordering new software for your system.

Any Range Rover dealer can help you, just go to the parts department and tell them what you need.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Hi

To change or assign the function of the Navigator buttons go to the Logitech icon in your desk top tray (bottom right hand corner), right click, this brings up a menu where you can decide how you want your keyboard to work for you.

Hope this helps. Thanks for using FixYa.

Both navigation keys and number keys stopped working
any ideas

What you need to do is go to the Canon driver downloads page and download the MP Navigator. I had the same problem becuse the disc that came with the printer doesn't work with Vista. You have to know which programs to download! You only need the MP Driver and the MP Navigator and all should work!

What navigation software you use? All navigation software need to install correct Port and Baud Rate for work - please check it in you software.

If you need help or professional GPS-consultation or unlock you PNA, update navigation maps - please ask
http://www.goodslowprice.com/en/unlock.htm