I have to touch the leapfrog globe really hard with the stylus. Can I get a new stylus?

Look at the goodwill for a used 1 that works

The have replacement stylus's available through customer service. Call them and order one. The number is 1-800-701-5327 or email them on their website, under Customer Support. Best of luck. I am in need of a new stylus too so I will be calling in the morning.

Hello,

If you are in the US, you can call their Consumer Services number at:

1-800-701-5327

They will be able to help you get a new one.

Thanks for using Fixya.

Try this web site http://www.gradware.com/product/view/950905?sourcecode=gwce&promocode=ce02&utm_source=GoogleBase&utm_medium=CompEngine&utm_campaign=ce02&ci_src=14110944&ci_sku=950905 or ebay.

I’m happy to assist further over the phone at https://www.6ya.com/expert/steve_adeb887ae4e1e688

Here would be a good place to start.

http://www.leapfrog.com/en_gb/new_home.html?utm_source=google&utm_medium=cpc&utm_term=leapfrog&utm_campaign=Pure%20Brand&gclid=CNmV9ouWo50CFZoU4wod1Fyk2g

Hello Sushil,

If in the US, Call their Consumer Services number at:

1-800-701-5327

They will be able to help you get a new one.


Thanks for using Fixya and consider rating this solution.

Wayne

I called this number they can send a replacement pen for £5
LeapFrog UK`s free customer helpline.0800 169 5435

Simply call Consumer Services at 1-800-701-5327 to order a new pen.

You can get a new stylus pen from LeapFrog. Please read our FAQ on this topic for more information and directions.

LeapFrog Gillian

ok, last night I was doing some research on my daughters leapster, its not a quantum leap, but maybe can be fixed the same way. I found out that you can "recalibrate" the machine. I used the instructions for the leapster, but here is what they said about the Quantum:


Turn the power on. Wait until you see the "Home" screen.
Find the small hole in the back of your Pixter unit above the battery compartment door. That’s the calibration hole.
Insert, push and hold the stylus in the calibration hole. Turn Pixter over so that you can see the screen. When you see two plus signs, remove the stylus from the calibration hole.
First touch the plus sign in the upper left corner with the tip of the stylus.
Then touch the plus sign in the lower right corner with the tip of the stylus.

GOOD LUCK, HOPE THIS WORKS FOR YOU, I ALMOST THREW MINE OUT TOO AND NOW IT WORKS.