How to set the tension? on my singer 7400 sewing machine.

CE-200 : FAQs ' SINGER Futura Support

futura-support.com/products/ce-200/faqs

What needles should I use with my SINGER® FUTURA™ sewing and embroidery machine? ... How do I wind a bobbin when my embroidery unit is attached? 1.

Singer wind machine lasko squeak Sewing Machines ...

www.fixya.com > ... > wind machine lasko squeak > Sewing Machines

Singer sewing machines wind machine lasko squeak related questions and answers. Ask your Singer ... How can I fix this? slide ... Ad. Question ... wind a bobbin. Itcould be very loose and when you start to wind a bobbin, it tightens itself ... Question about CE-200 Quantum Futura Computerized Sewing Machine. 1 Answer ...

SINGER® Sewing Machine Maintenance & Troubleshooting ...

? 4:05
https://www.youtube.com/watch?v=O7N4XaIV6ms

Singer sewing machine controls - YouTube

? 3:37
https://www.youtube.com/watch?v=yO3OlJXSoMQ
Jun 26, 2012 - Uploaded by cindylouwho0619
1:54. How To Clean and Oil A Sewing Machine - Duration: 12:07. by Niler Taylor 245,750 views. 12:07. How ...

Winding a Singer Sewing Machine Bobbin - YouT

sounds like a blunt needle,or tension at wrong setting.replace needle first.adrian,,,,

the tension at bobbin seems to be the problem, make sure bobbin thread is in placed in bobbin CORRECTLY...then it should not be loose but loose enough to pull out with the slightest pull, top tension should be set on around 4,,,,,

If the bottom thread is showing through, back off the tensioner, 1/2 number at a time.

For all sewing machines, if the bobbin thread is showing on the top surface, then the top tension is probably too tight. Turn the tension indicator to the left by half a number to a lower value. (So that if 5 was lined up with the dot initially, then go to 4.5 lined up with the dot).

See this article for some clear pictures of thread tension adjustments: http://www.ca.uky.edu/HES/fcs/FACTSHTS/CT-MMB-213.pdf . If you can find it the Singer Sewing Book is a good reference http://www.amazon.com/Singer-Sewing-Book-Gladys-Cunningham/dp/0307098702 .

This site, http://www.allbrands.com/products/abc0762.html , may be able to find and send you a manual to the TacSew T11-115. They have the T11-155 for sale.

I hope this helps.

Cindy Wells

The bobbin goes into the holder in what would appear to be the wrong direction ie, the thread doubles back. If this is correct, the bobbin tension might be too low, there is a screw on the bobbin holder to set the tension.

a good sign when sewing is, when your thread keeps breaking, your needle usally has a spot on the tip and cuts your thread. If that doesn't solve it, it your timing in the machine. Also make sure your tension isn't too tight, that will also break your thread.

Kdog

Hello there, loosen your top thread tension,if it looping on top of the material the tension is way too tight, you will also find changing the thread size to smaller thread, the top tension will also reduce,depending on application a good size thread to use is 25 grade,bobbin tension should have just a slight amount of drag as the top thread and bottom work against each other when sewing.

regards

Tony