Hi, try the driver for KonicaMinolta Bizhub 162, it is almost the same machine.
You can find the driver on www.konicaminolta.eu at the download section.
Konica Minolta Photo Imaging, Inc. ceased its Camera Business Operation as of 31 March, 2006, and since 1 April, 2006
Sony Corporation has been providing customer service for Konica's,
Minolta's, and Konica Minolta's cameras (excluding Film-in cameras) and
camera-related products except for the binoculars.
Please be informed upon the termination of the Agreement between Sony Corporation and Konica Minolta Photo Imaging, Inc..
Konica Minolta ceased the entire customer services for Konica Minolta cameras and related products, as of 31 December, 2010.
After 1 January, 2011, the Repair Service Providers will continue support for the repair service independently.
To view the list of Repair Service Providers for each region, please click HERE.
This is a very old post; however, maybe someone could use my help :).
The Konica Minolta Di2011 can be ordered with a built in printer module or not. The difference is that when you have the printer module, it works on PCL, but if not, it will only work using a GDI emulator.
For Win XP, you can find very easily the drivers on Konica website.
The drivers for Win7 64bit, especially the GDI Emulation for DI2011, cannot be found on the website.
I have found on the Konica Minolta website the STD GDI emulator for some other models and I have tested the one for the printer Konica Minolta 162.
It seems it works without problems for now, however I was only using it in A4 mode - manually selected. I have found that it requires a manual selection of the paper size and tray as it will not switch automatically.
I hope this helps.
BR S.H.
359 views
Usually answered in minutes!
×