How do you hook up scosche FAI-3A? - Scosche Industries Scosche Slc4 Speaker High Level Converter

call for in struction ;;6479193305

http://www.scosche.com/car-audio/downloads/dl/file/id/667/slc_4_instructions.pdf

The FAI-3A is just the "Walmart exclusive" version of the SLC-4. The two products are identical except for the model number.

you can download the instruction manual for free at the following link.

http://www.scosche.com/car-audio/product/999

the pigtail is connected to ground for additional noise suppression

http://forums.genvibe.com/zerothread?id=14516 try this website

Hello worsttintent,

The FAI3A is a 4-channel converter. Perhaps you connected the input from your rear speakers to 2 channels but ran the RCA's from the other 2 channels. It's also possible that the levels need to be adjusted.

Check the wiring and adjustments. Put the RCA's in the unused channels and see if there's output from there. If this doesn't work, most likely, the LOC is defective.

Hope this helps.

the 2 left and right dont matter, it only matters when ur hooking up a 4 channel amp.
all u do is connect one of the channels to it but it would be best o buy a stereo ull have alot of engine nose and vibration on ur speakers and a thump every time u turn on ur car but itll sound ok for now ti

did you cut them and splice into them. Because instead splice them all together and it should all work. or if you have a multichannel amp just hook ur factories into the amp as well.

<img src="http://i44.tinypic.com/2nbaf0i.jpg"><br><br>I think THIS is what most people have been looking for.

Contact customer service of manufacturer