How to unlock motorola razr v3 without knowing the unlock code or the security code?

Which Country Network Lock now?
You can get the Unlock code and Unlock Instructions at
http://www.theunlockspot.com/motorola-razr-v3/rs10wp9/
follow the Instructions and Unlock it step by step:
Motorola RAZR V3 Unlocking Instructions Warning : Do not enter any wrong unlock codes on your Motorola RAZR V3 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola RAZR V3 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola RAZR V3 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola RAZR V3 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola RAZR V3 ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

Free Unlock code or software that will loses the data in the Mobile...also Leads to Permanent lock,if that code is wrong code....So that i would suggest the safe and Secure Unlock code,here
http://www.onlinegsmunlock.com/motorola-razr-v3/rs7wp9/ and Unlock the Mobile.......

here
http://www.mobileunlocksolutions.com/motorola-v3/rs1wp9/
you can get your Motorola RAZR V3 mobile model unlocked at very low cost ,full secure & Safe..

Changing a Code, PIN, or Password Motorola V3
Your phone’s 4-digit unlock code is originally set to 1234, and the 6-digit security code is originally set to 000000.

Your service provider may reset these codes before you receive your phone.

. The unlock code must contain 4 digits, and the security code must contain 6 digits.

One trick I know: When changing the code, when it asks for the old password, press the "menu" button first, then enter 000000 and that may work also.

Depending on how many modifications, hacks, or customizations that you perform on your Motorola RAZR V3 phone, there may be situations where the phone becomes unusable or completely locks up. I have had visitors to the site report not being able to delete ring tones, text messages, or have other strange behaviors with their Motorola RAZR V3 phone.

If this is you situation, then you may be interested in performing a master reset (or “hard reset”) on your phone. The master reset will effectively restore your phone back to the factory condition, inclusive of all settings. Be warned, any data that you have not backed up, photos you have not transferred, calendar settings, or messages you have not saved will be lost! Make sure you do this first, if possible!

Here is how you perform a Master Reset on the Motorola RAZR V3:
1. Open your phone up and go to “Settings”
2. Next go to the selection for “Initial Setup”
3. Next go to the selection for “Master Clear”
4. Then select to confirm the option.
5. Now enter the security code which should be “000000”
6. Finally press select or ok and the phone will reset itself to the factory condition

Congratulation you have performed a “hard reset”, “hard reboot”, or “master reset” on your Motorola V3 RAZR and it should return to normal operating mode!

Trackbacks that led to this post:
hard reset motorolla razr v3
hard reset razr phone
wii master reset
hard reboot motorazr
how to hard reset a razor v3
master reset code for motorola v3
master reset code razr v3
master reset for v3 via pc
master reset motorola razr 2
master reset v3 razr with white screen
motorola v3m master reset
p2k commander
razor master reset
razr 3 and how to reset
razr master reset ebay
razr master reset password
razr master restart
razr screen master reset
reset razr
reset razr to factory
reset razr v3 to factory
v3 hard reset razr
v3 razr reset hard boot

‎

sometimes it defaults to the manufacturer security code "000000" or "1234"
also try the last 4 digits of your phone number.

there are various sites available which provide you unlock code if you know your imei no(15 digit).
simpler way is to go to professional software repair person, he will just do it for you

ok ,, just hit this when codes appear..( 000000 ) then let me know

the default unlock code is 1234 the security code is 000000

see buddy what u have to do is firstly u have to put worng code 4-5 times than it will ask for the PUK code which u have to put in after that. it will reset the password ,,,, if uu have allready followed the procedure than u can consult withany local vendor out there.