How to program puting a pecentage? - Texas Instruments TI-84 Plus Calculator

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

The clerk login should never change without secret code programming so it seems very strange. What buttons are you pressing to log in. Are you sure you are using the correct PIN numbers for your clerks?

Unless you are paying for a "facsimile" line...the odds are that you are paying for a phone line and using a fax on it. The responsibility of ATT is to provide you with a line which meets phone quality. If you are getting errors due to occassional poor line connections these may not even be due to poor lines in your local area. See about getting your fax set to allow more "error" pecentage to be received before giving errors...probably need a service man for that adjustment tho".

Hi,

The answer is 85 percent.

Thanks

These radios can be programmed via the keypad. However, this option must be enabled through the software, and must have a component removed from the circuit board. If you have a radio that will not go into self-programming mode when you use the proper key combination (light button+dial button while turning the radio on), your radio has not been enabled for this option.

programming instructions:
http://www.repeater-builder.com/kenwood/field-programming-tk-x70.html

this is posted in your owners man. i think you need to pull the high beem switch back and then hit the door locks once for on and twice for off depends, i have a crew cab so they have more door unlock lock choices

I need to know what part of programming do you need help with.

1. Finding Frequencies for agencies around you?
2. Actually puting the information into your scanner?

elijam1
http://www.scannermaster.com/?Click=37131

The battery is worn out and will need replacing. As for the CD burner, many times, when the CD drive recognizes and reads, but won't burn, the burning end or board in the drive has gone out. You might also try a different burning software.

what do you mean area codes are auto matic and puting in numbers the phone should have stored them in memmory what else are you trying program into this phone

Follow this link for the owner's manual,
http://www.uniden.com.au/RESOURCES_MAIN/pdfs/UBC72XLT_for_web.pdf

See page 29 for programming instructions.

Hope this helps,
Check out my blog at http://www.pchelpforanyone.blogspot.com