At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
get an ethernet patch cable cat 6
looks like
https://www.monoprice.com/product?p_id=2115
plug it into notebook ethernet port and plug other end into your router's ethernet port . from specs it has an ethernet port only one port ! https://www.router-reset.com/reset-manuals/3Com/3CRWE454G72
then log into via a browser to 192.168.1.1 and go to wi fi security
and note the wep or wpa encryption key used
user name could be a minus sign ?
user name is -
or it is blank ie nothing typed in ?
password is admin https://www.router-reset.com/default-password-ip-list/3Com
if you havnt changed the password to the router then it should either be "PASSWORD" "ADMIN" "ADMINASTRATOR" in the worst case senreio you may have to reset the router.
Open your browser and enter the 3Com URL configuration address http://192.168.1.1
Then go to the Menu Screen and select Reset to Factory Defaults.
When to change the rouer's wireless settings then you will also need to apply these changes to your wireless card in the computer so it can connect to the 3Com router.
For 3com type of routers, you must connect firstly to 3com setup, By:
First: open your browser and type 192.168.1.1
Second: you will find adapter setting and reset it, it all depends upon your router's software.
Third: the easiest way is to reset it from the small button in the back of your router.
Press reset button on the rear of the unit for 5 secconds, then by connecting your moden in to yor laptop go to the following web page: http://www.3com.com/products/en_US/detail.jsp?tab=support&sku=3CRWE454G72&pathtype=purchase and there you will find the software and manual for your AP (access point) the software will let you setup the device from scratch. the default password is admin. hope this helps.
I think the easiest thing would be to reset the router to default. There should be a reset hole on the back of router. This sets SSID to router manufacture name and ID and Password are set to "admin". Then it should just automaticly connect. You can then change SSID, ID and Passwoord. Connect to the internet with a browser and then reconnect the cables from modem to router to computer. Hopefully this will help or solve. Thanks..!!
you need to get into the routers settings (192.168.1.1 in your web browser) and look for DHCP, and enable it so as to give your pc's there automatic ip addresses, also check in the general settings if it's a modem router that you have got a internet connection from your ISP and all the dns and ip addresses are showing.
Go to the properties of each network card in network connections in your control panel and click on the TCP/IP line and click properties again and ensure obtain ip address automatically is selected and click ok.
Restart all pc's if neccasary and refresh your web browser when trying to get online.
×