HP DESKJET ADVANTAGE 3 IN PRINTER IS NOT WORKING, THE INDICATOR LIGHT IS KEEP ON BLINKING

Question edited for clarity. 3 Questions made into one question, 2 duplicates deleted. Refresh page to see your question.
Please don't type in all CAPS, it is considered SHOUTING and harder to read.

There are three different colour of lights. All explained here.

blinking information red light - HP Support Community

hp.com https://h30434.www3.hp.com > td-p
Jun 29, 2020 - 1) Take out the cartridges. 2) Unplug the power cord from the printer & wall. 3) Wait for 30 seconds. 4) Plug the power cord back into ...
Missing: 890c ‎' Must include: 890c

• 
  

  HP Deskjet Printers - Blinking Lights ' HP® Customer Support

  https://support.hp.com > ca-en > document
  Follow these steps to reset the power module. Disconnect the power cord from the rear of the printer. Unplug the power cord from the electrical outlet. Unplug ...
• 
  

  Blinking Lights on the HP Deskjet 900 Printer Series

  https://support.hp.com > us-en > document > bud09170
  These lights can be on, off, or blinking (flashing), depending on the status of the product. Blinking lights can indicate error conditions.

HP Printer users faced trouble when they setup HP Printer with the computer. Follow the steps to setup your HP 3830 desk jet printer.

Step1: Unpack your printer and connect to power

Step2: HP Easy Start Printer Setup Software Step3: After printer setup, add this printer to your HP Support Dashboard

To get the user manual/support/information for your 2515, go here:

https://support.hp.com/us-en/product/hp-deskjet-ink-advantage-2510-all-in-one-printer-series/5165417/model/5165418/manuals

I am assuming that the manual will explain the error codes, what they mean, and how to deal with them.

Good luck.

Replace the cartridges
To replace the cartridges
1. Check power. Make sure printer is on
2. Load paper.
3. Remove cartridge.
a. Open cartridge door. Wait for print carriage to move to center.
b. Press down to release cartridge, then remove it from slot.

After your printer has completed its initial startup you should have a solid green light. If the light indicator is blinking or orange often this is an indication of a printer error. For example, this could indicate a paper jam, issue with the ink or toner cartridge, or other serious error.
Because there is no standard to what a blinking light or orange light means if you're getting either of these we suggest referring to the printer documentation for troubleshooting steps or methods of determining what the status indicator is reporting.
http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Deskjet+D1560+Printer&product=3374275&tmp_qt=power+light+flashing&lc=en&dlc=en&cc=us

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.) 2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.) 3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power and Resume/Cancel buttons. 4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times. Finally press the Power button.

I have a 6940 color printer and I am assuming the 'tear' buttons are the same. If so, it is an out of toner indicator.

Hi,
Green light blinking is indicated that u r one of the cartridge (or both cartridges ) are faulty .please check u r printer with tested Ok cartridges ...it should be resolved


if this information is useful for u please Rate me .........
u r Rating is Important for me.

my hp deskjet 3550 doesnt doesnt work it green light only keeps on blinking and no response from at all.. please help me tanx

my hp 2300jet ink printer not taking paper,green light only blinking