-
Expert
55 Answers
- Posted on Aug 09, 2011
Re: Have connected wii to cable via cisco asa 5505 box....
Error Code: 52020
What to do will depend on how you are connecting your Wii console.
Please use the info below that describes how you are connecting.
Connecting directly to a modem:
- Power off the Wii. Connect the official Nintendo Wii LAN
adapter to the Wii, and insert a working ethernet cable into the
official Nintendo Wii LAN Adapter.
- Unplug all devices from your modem. Most modems are unable to support more than one device at a time.
- Power cycle your modem. To do this, unplug the power from
your modem and let it rest for 20 seconds. Plug the power back in.
Connect the Ethernet cable from your Wii console to the Ethernet port on
your modem.
- If the connection test fails, try a "Manual Setup" with the Wii console (how
to), using your network's IP address, Default Gateway, Subnet Mask, and DNS information. To access these settings:
- On your PC, click "Start" and then "Run."
- Type "CMD" into the field that appears to open a new window.
- Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings,
including the settings listed above. Input these exactly as they're listed into the "Manual Setup" of the
Wii console's internet connection.
- If you are still unable to connect and you are using
broadband Internet, then your ISP likely uses PPPoE to establish a
connection to their network. The Wii is not compatible with PPPoE.
Contact your ISP for more assistance.
Connecting to a router:
- Ensure that an Ethernet Cable is running from the WAN or
Internet Port on the router to the modem. Power cycle the modem by
unplugging it from the electrical outlet, waiting a moment, and then
plugging it back in.
- Power off the Wii console, and insert the Wii LAN Adapter into one of the USB ports on the back of the Wii console.
- Run an ethernet cable from the Wii to a numbered port on the router.
- Power on the Wii console, and run a connection test through the Wii console's online settings.
- If the connection test fails, try a "Manual Setup" with the Wii console (how
to), using your network's settings on your PC:
- On your PC, click "Start" and then "Run."
- Type "CMD" into the field that appears to open a new window.
- Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings,
including the settings listed above. Input these as they're listed into the "Manual Setup" of the
Wii console's internet connection, except for the IP address. The IP address needs to be different. Add 10 to the IP address and use that number in the Wii console's settings.
you can also visit this site for more information about your comsole tnxx please rate me if this help you...
http://www.nintendo.com/consumer/wfc/en_na/ds/results.jsp?error_code=52020&system=Wii&locale=en_US
×