Anonymous Posted on Aug 08, 2011

How do i tune tv #2 from the reciever or the 1st remote? dish network dual reciever, silver remotes.

2 Answers

dish

Official Brand Answer 263 Answers
Posted on Aug 09, 2011

dish

Official Brand Answer

Joined: Dec 21, 2010

Answers

263

Questions

Helped

108317

Points

330

Hi heather,
As David mentioned more info would be appreciated, but itsounds like you just want the remote for TV1 to work TV2. With the remotesyou're given originally it is not possible, though if you were to get an UHFremote and put it on the same frequency/address as TV2's remote with the correctkey in the bottom it would change them both.
Another option that may be easier is switching the receiver to Single mode bypressing the mode button on the right side of the receiver. You can also mirrorthe TV's by connecting another cable from the TV1 port to the TV2 and they willshow the same programming.If you have any other questions you can reach me at [email protected]

DISH Network
Tommy Faust

Anonymous

Master 961 Answers
Posted on Aug 08, 2011

Anonymous

Master

Joined: Mar 03, 2011

Answers

961

Questions

Helped

273627

Points

3003

I'm not sure I understand your question. If you are trying to use a second TV without a remote or if you are trying to set up TV 2. The two remotes are different so, they will not perform on both Tv's. Please gine me more info on what you are trying to do.
Thanks,
Dave

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

Dual control noted on Dish tv screen but cannot change stations separately on both tvs

Each TV receiver has to be fed with a separate cable from the lnb. They can not be bridges or split.

Read full answer

Mar 09, 2015 • Dish Network/Pansat Dish Network Dish 500...

2helpful

1answer

Recent IR20.0 remote problem developed after 2 years without any issues. The remote no longer communicates to my 722k dvr reciever while my LG Tv is turned on. I have Hdmi run directly from reciever to my...

Hi Robert, my name is Cheri Torres and I work on the Social Media Team at DISH. It sounds like your remote is experiencing IR(Infrared) interference from your LG TV. You can resolve this issue by converting your TV1 remote to UHF(Ultra High Frequency) instead of IR. In order to do this you will need a UHF remote, the 20.0 remote is only an IR remote. Please email me directly at [email protected] with your account number or phone number on the account so that I can look into getting a UHF remote sent out. Thank you.

Cheri Torres
Social Media Representative
DISH L.L.C.
[email protected]

Read full answer

Apr 08, 2012 • DISH Network IR Remote Control

0helpful

1answer

How do i change tv 2 with reciever or remote 1, lost remote 2.

Hi this isMike Houston of DISH Network and I see you have lost your TV2 remote. Until youget your 2nd remote you can put the receiver in Single Mode and putTV1 on the channel you want to watch for TV2 and then put it back in Dual Mode.I can help you in getting your TV2 remote so you can watch TV on both setswithout having to change the Mode setting on TV1, I will send you my e-mail andyou can contact me through there; [email protected].

Read full answer

Aug 08, 2011 • DISH Network DVR-625 DTV Receiver /...

1helpful

2answers

We have 2 led/lcd vizio tv's. (TV1) is a 47"

first off, check the mode setting at tv 1, are you in dual mode, or single. you need to be in dual. Also sounds like the remotes address is not correct. rather then me typeing forever here, I would call dish, 1-800-894-9131, they can walk you rite through it.

Read full answer

Mar 20, 2011 • DISH Network ViP722 DTV Receiver /...

0helpful

1answer

Dual tuner remote changes every reciever in the house...

Hello, my name is Tommy Faust with DISH Network. I'd be happy to help with that problem. I would need a bit more information to ensure we fix that quickly though. Is it a tv 2 remote or a tv1 remote, and how many receivers do you have? Post back to me here if you still require assistance.

Read full answer

Dec 11, 2010 • DISH Network IR Remote Control

0helpful

1answer

Having trouble getting my Dish Universal remote to connect to my Insignia 19" flats screen television. I think it is the silver (ES3189) model remote

traceroberso,

I came across your post. Are you still having problems with your DISH Network remote operating your Insignia TV? If you still are, I have 2 codes you can try to see if it will work on your TV. The codes are: 720, 539. The steps to program the remote to the TV are below.

Remotes: Basic (Television Only)

Turn the Television On
Press and Hold the TV Power button for three seconds until the LED flashes
Enter the three-digit code using the buttons on the number pad.
Press OK. Note: The LED will flash three times.
Test functionality with the TV
Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Ray Calo
DISH Network - Executive Offices

Read full answer

Nov 11, 2010 • DISH Network EZ Remote Remote Control

0helpful

1answer

Remote for box 1 is changing channels for remote 2 and remote 2 does not work

lieslmc

Are you getting the same picture on both TVs - TV 1 and TV 2? Depending on the receiver model, you have a mode button either on the front of the receiver or behind a door on the right side of the receiver. You also should have a green (TV 1), amber (mode), and blue (TV 2) lights on the receiver. If TV 2 is one, the blue light should be lit. The amber light should be lit under the dual mode. Press and release the mode button on the receiver to put the receiver in dual mode. The blue light (TV 2) should illuminate now and this will give you independent operation between the two TVs. I hope this helps.

Ray Calo
DISH Network

Read full answer

Jun 18, 2010 • DISH Network IR Remote Control

42helpful

1answer

Dish network control not working on 2nd. tv

You have a dual receiver and 2 remotes. make sure that receiver is in dual mode. That you press the sat key on remote 2 if it will still not operate take remote 2 to the receiver. With remote #1 press the menu button twice you should then be on they system info screen. Pick up remote #2 press and hold sat key until it blinks press record 3 times . press red power button and if tv2 light goes off and on the remote should work again for tv2 . Use remote #1 press select exit screen,

Read full answer

Jun 02, 2010 • DISH Network IR Remote Control

0helpful

1answer

My dvr remote 2 has been taken over by my other tv2 remote is there a way activate the former remote? I just had a hdtv dual dvr installed and a new dual reciever. I already had a dual dvr. When I had the...

Unplug one of the receivers. Now go to the second and with the TV1 remote press MENU-MENU and you will see the two remote addresses displayed. On the TV 2 remote that is associated to turn off the TV2 with this receiver press and hold the SAT button on the top left of the remote until all the buttons across the top illuminate. Now key in a two digit number that differs from the one for TV2 displayed on the screen. Now press the pound sign and the SAT button will flash three times. Next press the small record button until the TV2 address changes to the correct two digit number. Now you should be able to turn the other receiver back on and be able to control each TV2 independent of each other. Thanks for using Fix Ya. If you need further assistance let me know.

Read full answer

Sep 17, 2009 • DISH Network IR Remote Control

0helpful

1answer

I need to program my URC-4220 ONE FOR ALL remote to operate my new dual dishnetwork dual dvr for tv number 2. Help

tamiwalsh333

With the TV 2 remote, it needs to be a UHF type remote. Since the signal goes through solid objects (walls, etc.), you should check to see if this remote has that capability. I have provided codes you can try to program the remote to the receiver. I hope this helps.

Dish Network
System 0775, 1005, 1505, 1775

Ray Calo
DISH Network

Read full answer

Aug 17, 2009 • DISH Network DVR-625 DTV Receiver /...

Not finding what you are looking for?

View Most Popular

DVR-625 DTV Receiver / 100-Hours Video Recorder

Televison & Video

Dual control noted on Dish tv screen but cannot change stations separately on both tvs

Dish Network/Pansat Dish Network Dish 500 Antenna Satellite Package with Pansat 4500 FTA Reciever - D4500

248 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for DISH Network DVR-625 DTV Receiver / 100-Hours Video Recorder? Or just drag it here!

Related Topics:

How do i tune tv #2 from the reciever or the 1st remote? dish network dual reciever, silver remotes.

2 Answers