Top 20 New Bright Remote Control Toyota FJ Cruiser - Page 2 Questions & Answers

What size batteries does the 1986 D and W R.R Denver express take

How do i get the train to turn on and make noises anbd move

I ned battery charger 19.2 V for m'y Hommer 3

The track layout is simple enough,there are 12 straight peice of tracks and 12 curved tracks. So you can make it one big circle and not use the straight tracks or add 1-6 on each sidewith straight track and you'll have a long oval. Or have 1-4 on each side then add 1-4 after the third curved track of each circlular end to have a big type oval style.Some lites lite up right when you push the power switch on and the remaining lights will work once the train is in motion.

If you take the look at the price in the link
http://www.buzzillions.com/reviews/new-bright-radio-control-hummer-h2-1-6-scale-black-reviews
then you will realise why it does not worth to someone sell only the parts you need since you can buy the whole unit at this prices. So you should think to buy a whole unit and if you love the one you already have you can transfer all the parts you need and have also some spares.

ebay, or hobbyshop, or hobbyzone

I think I'd get one of those chargers that will fit anything- select the right plug and voltage, you're in.

eBay is where I'd check first.

lp

yes just look at the boot sales or flea markets ,find a 9v charger with correct end on ,or visit the local chinese emporium and no b?doubt you will find a charger in their of 9v its a fairly common voltage ,9.6?? well 9v will do it fine ,or even a 12v one but dont leave it connected for any length of time

Hi! Best option is to rip all the electronics off and built it up yourself - no replacementparts for those toys. The other option is to sell the boat to me - I would do option 1 with it, because in Switzerland, it seems to be impossible to get such a boat...!

If the antenna came off of the controller in one day, I would return the whole unit to where you bought it and exchange it for a new unit.

switch pieces on opposite sides, one straight piece on each side of switch piece, then 5 curved pieces each end.

We found a gear that had cracked, and separated from the shaft.

We fixed it with some superglue.

thanks.

Make sure your track is clean. take a green scrub pad and rub the track to clean off any tarnish

www.cheapbatterypacks.com

Can you be more specific the rest of your question was cut off. But if you asking if you can switch the freequency's its a yes/no question. The (production) toys come with a complete board and you would have to buy another toy with a different frequency and switch it as there are no aftermarket parts/crystals for sale on Department store toys. You could fine a broken one and switch the remote/electronic in the car. The 2 frequencies are 27mhz/49mxz so if you have one its the other you need. If you purchase a hobby car from a hobby store you can buy a set of different frequency cristals for about $20-$40 And switch them and even for replacement as they go bad from time to time..

Look on Ebay!

It can be taken apart as i had the same problem.

CHECK FOR SWITCH ON BOTTOM OF TRAIN

Question edited for clarity and spelling of the maker, 'Spaulding'.

Manuals Page

Spalding.com https://www.spalding.com > customer-service > info > m... Systems Manual Finder. You will need your model number to locate the correct manual. Please follow the steps below or visit our interactive manual finder. ..

I would contact your service provider for the code.