Top 20 Vtech V Tech Kidizoom Camera Questions & Answers

no that is bad

Hello Sarah

Normally when you connect a device to a usb port , the two devices do something called a handshake in which each device tells the other it is on and ready to receive data. This handshake is again broken when the device is safely removed in windows/your operating system.

Sometimes the problem can also be caused by power failure (like a low battery or unexpected ejection of the battery) as the dip in power affects the usb circuit into thinking it got a handshake.

The first thing I would like you to try is connecting the USB cable and then safely removing it in windows. Repeat this about 10 times and check to see if it sends a stop signal to the camera so that it goes of USB mode.

If that does not work , try removing the camera's batteries for the night and try it again tomorrow. This is in hope that the camera will reset as you are not able to access the reset in the software at this time.

Let me know by tomorrow if neither options worked and I will look for an alternative to sending it in for repairs.

Kind Regards
StephanSA

yes *** in her mouth and vid it

download the manual from the following link
http://safemanuals.com/user-guide-instructions-owner-manual/VTECH/KIDIZOOM%20CAMERA-_E

http://www.vtechkids.com/support_manuals.cfm?browseletter=K

Question edited for clarity and spelling. Question moved from Cameras to the VTech Category. If the batteries are Dollar Store or old, buy a new set of Duracell. There are a lot of counterfeits coming out of the far east. Amazon Basics are pretty good and they are always fresh. Phone VTech or use their Support form. Details in the link below. https://www.vtechkids.ca/en/support/support_form ..

Hi there, there doesn't seem to be any specific information online for how to take it apart, but I've attached the user manual as a link to reverse the process. It seems you can easily remove the "shoulders" from the "base", all four legs can be detached easily, and the stool has removable legs as well. Hope this helped.

Hey there, seems like you've already tried many solutions. May I suggest checking if the SD card has been formatted before its first use (check to see if your SD card is formatted as a FAT16 or FAT32 partition). I have attached a link with further details on doing this. Also make sure your SD card is not in write-protected mode (the Lock switch on your SD card should be in the off position) and try again. As well, make sure you have the most updated software on your device. If nothing else works, I got the below text from the Vtech website. "If you have a problem that cannot be solved by using this manual, we encourage you to visit us online or contact our Consumer Services Department with any problems and/or suggestions that you might have. A support representative will be happy to assist you. Before requesting support, please be ready to provide or include the information below: • The name of your product or model number (the model number is typically located on the back or bottom of your product). • The actual problem you are experiencing. • The actions you took right before the problem occurred. Internet : www.vtechkids.com Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada"

Go to settings and it should have something about Languages and press that and press english.

Apparently you can disconnect all power supplies (batteries and adapter), then reconnect all power supplies. Press the ON/OFF button. Remove the storybook cartridge, clean it if necessary, then re-insert it into the V.Reader. I've also included the product manual as a link. There doesn't seem to be any real answers online for this, but if you're out of options, I'd contact their customer service team at https://www.vtechkids.ca/en/support/form or call 1-877-352-8697.

PLease contact VTech support at the link below.. https://www.vtechkids.com/support/support_form

You can go to the Google Play to find the free games and download. And also you can refer to this blog post which introduces the way to get paid apps free. http://android-garden.blogspot.com/2013/12/how-to-download-install-android-paid.html

Go to the settings under MY NAME and type in R-E-S-E-T to erase everything and start over. That is the only way to remove a name!!

ebay have the innotab pens

You directed this question at me, but unfortunately I'm unable to provide you with a real solution at this time. FixYa has discontinued direct questions, so if you would care to repost your question, the repost will be visible to all members of the FixYa community. Hopefully one of them will be able to provide you with a real solution.Thank you for using FixYa.

If you put in batteries and the unit turned on, then you should get a signal to the TV. Some TVs use a certain channel (like 3 or 4) and some have a tv/video button on the set or on the remote - but if you checked that out already you just might have a broken toy. : (

There's a site where you can download the user guide for free online. Just click_here so that you will be directed to the exact site where you can download the user guide.

I hope you have a great day. Thanks.

Hi lrigney,

If the unit won't turn on, it is often caused by an electrostatic discharge. The easiest way to correct this is by resetting the unit. Please follow the steps below.

You can reset the Storio by:
1. Removing then replugging in the adaptor.

2. Then press the ON/OFF button again.

3. Remove the USB cable, reinsert the batteries and adaptor.

4. Replug the USB cable.

5. Remove any corrupted files and restart the downloading process.

Hope it helps.

Thank you for using FixYa.

You can download the manual here

http://www.vtechkids.com/support/product_manuals/

Copy and paste this URL into your web browser, enter the name of the camera in the box and you can get the pdf.