20 Most Recent
LeapFrog Leapster 2 Learning System - Page 3 Questions & Answers
The touch screen is not responding to the touch
Try to recalibrate the screen:
Insert a cartridge, turn the unit on and wait for the sign-in screen to appear.
Hold down the Home, Hint and B buttons simultaneously.
When the screen changes, press the A button.
Using the Stylus, touch the center of the targets.
11/29/2011 1:31:40 AM •
LeapFrog...
•
Answered
on Nov 29, 2011
I am trying to connect
The Eject button appears when a Leapster2 handheld is connected and
turned on. When you have finished configuring the Leapster2 handheld and
your child wants to play with it, you can click the Eject button to
disconnect the device. Once ejected, a message will appear letting you
know that it is safe to disconnect the Leapster2 handheld from the
computer. It is not really a "button" but a picture of a green button which says "EJECT". It should be located on the upper right corner of your screen.
10/12/2011 1:39:08 PM •
LeapFrog...
•
Answered
on Oct 12, 2011
Leapster 2 powers up to warning screen and then
Connect it via USB to your PC/laptop. It'll connect to the Leapster website and appear to update firmware. Once it is finished, it will let you know to disconnect. After that it should work. I had the same problem and did this, and now it's working fine.
8/22/2011 7:52:40 PM •
LeapFrog...
•
Answered
on Aug 22, 2011
Touch screen doesnt work only used three times
1.hold down the hint button while turning the unit on.
2.when leapster menu screen appears, press the A button.
3. touch each of the crosshairs that appear with the stylus
4. you restart unit.
8/12/2011 2:06:08 PM •
LeapFrog...
•
Answered
on Aug 12, 2011
I can't calibrate the leapster.I
Hi,
Welcome to Fixya. If you need to sync the device to the stylus just follow the steps below.
1. Turn your Leapster 2 off, and remove the game cartridge
2. Hold down the 'hint' button while the game is off. The 'hint' button is the middle small button in the row of three above the directional pad on the left, with a '?' on it.
3. With your finger still firmly on the 'hint' button, turn the Leapster 2 back on. Keep your finger on the 'hint' button.
4. The screen should be displaying the calibration screen. You can release the 'hint' button now.
5. Press the 'A' button on the right to enter the calibration screen.
6. A small '+' sign will appear on the screen. Touch it with the stylus. A new '+' sign will appear. Touch this with the stylus too, and repeat for as many '+' signs as your Leapster 2 throws at you.
7. The screen will return to the calibration screen. You can now turn the machine off. Leave the cartridge out of the console, and turn it back on.
8. Your stylus and touch screen should now be working, enabling you to sign in as usual.
9. If it is working correctly then you can turn it off, add a game cartridge and turn it back on.
If you have questions please let me know.Thanks for using Fixya
8/3/2011 9:27:11 PM •
LeapFrog...
•
Answered
on Aug 03, 2011
Dowloaded the free game says
I think your Leapster is not fully updated and sync with your PC.
Try to uninstall and reinstall the LeapFrog Connect.
Get the latest software from LeapFrog website instead install it from the CD provided.
You may need to wait for about 10-20 minutes for the software to configuring and updating the your Leapster 2.
You can also get more downloadable game for your Leapster 2 here:
http://leapster-2.blogspot.com/
6/29/2011 3:52:25 PM •
LeapFrog...
•
Answered
on Jun 29, 2011
Cartridges are not being read
You have to make sure that your Cartridges is clean. Try to vacum of
blow both of the cartridge hole and also the place where you put the
cartridge, Sometime very small tiny dirt will makes that the cartridge
cannot be recognise by the console.
Instead of 1 starter game and a few demo game that you get from Leapfrog
Connect, you can also get more downloadable games for your Leapster 2.
You can get it here:
leapster-2.blogspot.com
6/29/2011 10:43:15 AM •
LeapFrog...
•
Answered
on Jun 29, 2011
I turn on my daughter's
You have to make sure that your Cartridges is clean. Try to vacum of blow both of the cartridge hole and also the place where you put the cartridge, Sometime very small tiny dirt will makes that the cartridge cannot be recognise by the console.
Instead of 1 starter game and a few demo game that you get from Leapfrog
Connect, you can also get more downloadable games for your Leapster 2.
You can get it here:
leapster-2.blogspot.com
6/29/2011 10:42:19 AM •
LeapFrog...
•
Answered
on Jun 29, 2011
We just bought a leapster
Try to uninstall and
re-install the LeapFrog Connect and wait until it finish configuring and
updated the software both on the PC and the console, It may takes 10-20
mins for it to complete updating.
One more thing, you have to
make sure that you get latest LeapFrog Connect software from LeapFrog
website instead of installing it from supplied CD.
Instead of 1 starter game and a few demo game that you get from Leapfrog
Connect, you can also get more downloadable games for your Leapster 2.
You can get it here:
leapster-2.blogspot.com
6/29/2011 10:36:44 AM •
LeapFrog...
•
Answered
on Jun 29, 2011
There was a problem when
Instead of 1 starter game and a few demo game that you get from Leapfrog Connect, you can also get more downloadable games for your Leapster 2. You can get it here:
leapster-2.blogspot.comBut you have to make sure your Leapster 2 have SD Card and your Leapster 2 can connect to PC using Leapfrog connect. Try to uninstall and re-install the LeapFrog Connect and wait until it finish configuring and updated the software both on the PC and the console, It may takes 10-20 mins for it to complete updating.
One more thing, you have to make sure that you get latest LeapFrog Connect software from LeapFrog website instead of installing it from supplied CD.
6/29/2011 10:34:11 AM •
LeapFrog...
•
Answered
on Jun 29, 2011
I have just brought a
You need to re-connect your Leapster 2 to your PC. You have to make sure that the software is already updated both in the PC and in the console. Try to uninstall and re-install the LeapFrog Connect and wait until the software has been configured and update automatically which is until you see the status in LeapFrog Connect screen is "connected". You need to wait at least 10-20 mins for it to be completed I'm afraid.
One more thing, make sure you get the latest LeapFrog Connect Software from LeapFrog website instead of installing it from the supplied CD.
BTW, you can get more downloadable games for your Leapster 2 here:
leapster-2.blogspot.com
6/29/2011 10:27:17 AM •
LeapFrog...
•
Answered
on Jun 29, 2011
When trying to download free
Hi,
When you first time connected your Leapster 2 to your PC using LeapFrog Connect, first of all, the software need to be updated both on the PC and in the console. It will takes times for at least 10-20 mins for it to complete the update. You have to wait until the status show "connected".
Sometimes, it will takes longer. So, what I did before is uninstall the LeapFrog Connect and reinstall it. It works perfect after that. Hope it helps.
BTW, you can get more downloadable games for your Leapster 2 here:
leapster-2.blogspot.com
6/29/2011 10:20:23 AM •
LeapFrog...
•
Answered
on Jun 29, 2011
Not finding what you are looking for?