Top 20
Mercedes Benz Travel Alarm Clock - Page 7 Questions & Answers
How to detect overheating? In which part or subsystem the detectors are installed?
1. look at the temp gauge, is the temp higher than usual?
2. Do you smell coolant?
3. Is the coolant low in your coolant reservoir?
4. Some where you my have leak.
5. Next time before you park your car after driving it home
take a large piece of card board or tarp, lay it down,
drive over it park, let your car sit awhile. Now see what
liquids leaked on it. If you see coolant you have a leak.
On my prestige alarm system, when I hold the lock button down it makes a chirp noise and locks the door, but when I press the unlock button it unlocks the doors with no sound and it use to make a sound?
Hi there.
On quite a few of the Prestige systems, a quick press (whether arming or disarming) will activate the locks and trigger the audible chirp......but holding the button for 2+ seconds bypasses the audible chirp.
Eliminating simple things first (without knowing which model alarm/remote you have), is it possible that the button is sticking down? The easy way to tell is that the locks operate immediately when the button is released. If you find you have released, but the locks seem slow, the sticking button is a distinct possibility.
There are also options to silence the chirps on some systems. If you do not have the specific alarm owners manual handy, I'd suggest a quick google search will prove helpful. If you do find the manual, saving the document, or even just the text on the page and pasting it into a blank word doc will be handy for future reference. A printed copy for the vehicle glove box wouldn't be unreasonable either.
Cheers,
HDS live says radar source unknown. What is radar source?
Radar is microwave energy concentrated into a beam and bounced off approaching aircraft or ships or used for measuring the speed of cars, etc.
Low level microwave energy can be emitted by many sources - leakage from microwave ovens, various electronic equipment...
All recalls on thev2003 chevroler siveradp
00-06-01-026L
2018/10/03
Engine Replacement After Severe Internal Engine Damage - Replace Intake Manifold
07-06-01-016E
2018/07/24
Information on Internal Engine Noise or Damage After Oil Filter Replacement
16-NA-222
2018/07/23
Information for Engine Concerns Resulting from Lack of Scheduled Maintenance, Improper Service or Aftermarket Calibrations
06-00-89-031E
2018/03/28
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
06-06-01-010D
2018/01/31
Information on Close-Coupled Converter and Engine Replacement
PIP3343F
2018/01/09
Possible Engine Oil Leak Due To PCV Freeze-Up
PIE0439
2017/12/04
Engineering Information - California Only - Pilot Initiative - Urgent Service Action Required
01-06-01-011J
2017/11/30
Information on Engine Oil Consumption Guidelines
01-06-01-028C
2016/04/05
Engine - Knocking on Cold Start Explanation
12-06-01-008B
2015/03/09
Vehicle - Engine And Sub Systems Flushing Info. (CANADA)
PIP5169
2014/01/07
Engine Controls - DTC P0300 After Engine Repairs
11-00-90-001B
2013/05/21
Engine - dexos 1(R) and dexos 2(R) Oil Specs/Information
04-06-04-054E
2012/08/06
Engine - THIS BULLETIN HAS BEEN CANCELED
08-06-01-008A
2009/07/27
Engine - Drive Belt Misalignment Diagnostics
05-06-01-010B
2007/09/28
Engine - Sealant Usage/Procedures
06-06-01-019B
2007/06/12
Engine - Coolant Loss With No Visible Leaks
07-06-01-002
2007/03/05
Engine - Revised Connecting Rod Bolt Torque
06-06-01-026
2006/12/22
Engine - New Exhaust Manifold Bolts/Torque Specs
06-06-02-026
2006/12/22
Engine - Revised Exhaust Manifold Bolts/Torque Specs.
06-06-04-046
2006/09/12
Engine Controls - MIL ON/Misfire/Misfire DTC's Set
06-06-04-037
2006/08/04
Engine Controls - MIL Function During I/M Testing
02-06-04-015A
2006/03/07
Starting System - Engine No Start/No Crank Condition
05-06-04-029A
2005/06/24
Engine - Rough Idle/Misfire/MIL ON/DTC P0300
05-06-01-014
2005/05/09
Engine - Oil Leaks In Extreme Cold Temperatures
05-06-04-024
2005/03/17
Engine Controls - Revised DTC P1172 And P2636
04-06-04-057
2004/08/11
Engine Controls - Start/Stall/Poor Driveability
04-06-01-013
2004/04/01
Engine - Serpentine Drive Belt Wear Information
03-06-04-062
2003/11/19
Engine Controls - Revised DTC P2135
03-06-04-032
2003/06/16
Engine Controls - MIL ON/Low Voltage DTC's Set
03-06-04-031
2003/06/01
Engine Controls - Revised DTC P1125 Information
03-06-04-033A
2003/02/26
Engine Controls - Revised DTC P0336
03-06-04-015
2003/02/01
Driveability - Revised Engine Cranks Won't Run Diagnosis
03-06-01-003
2003/02/01
Engine/Transmission - Flexplate/Flywheel Replacement
02-06-01-038
2002/12/01
Engine - Knocking or Lifter Noise
02-06-01-028
2002/08/01
Engine - Crankcase Flushing Recommendation
Why does my remote car alarm LED light stays on?
That's usually an indicator light that the system is active...It can also say stay away from the novice thieves but if a pro wants your car you will be making an insurance claim. Pro's will get the car if they want it...
How to turn off alarm system. Does not work when I push the alarm button.
I'm including link of popular solutions, but when this happens rbme I just stick the key in the ignition, if that doesn't stop the alarm then go ahead and start it up, that should do it.
https://m.wikihow.com/Reset-a-Factory-Car-Alarm
If anyone finds this helpful please let me know by clicking the green "helpful" icon below. A few words in a testimonial or recommendation is the best compliment I could receive. I strive to help answer questions in a cost effective manner that addresses and fixes the problem so that you can move on to the more enjoyable parts of life. Any/All Feedback is Appreciated,Thanks!
Not finding what you are looking for?