Lucent 1872 Corded Phone - Answered Questions & Fixed issues

Try intercom 777

may be you are trying to empty your mailbox (delete) yet you have their an unread message (new message). If you try to delete a group of messages that includes new messages, the system beeps five times and doesn't delete any messages.
otherwise, To delete all messages for a particular line or mailbox, press the number of the line or mailbox (1-4) and then press 3. You'll hear "Messages deleted."

for sending text messages :
1.go to your message settings and check the message center number to see if it is correct
2. call to your network operator customer care
3. request the message center number...
4.note it down
5. go to message settings>message center number
6. insert the number which is noted by you and save it
this solves your messaging problem ...
Good luck

make sure the phone is plugged in. You'll need dialtone first, the other issue will fix themselves once you have dialtone!

It could either be that the handset cord is bad or if the static is on all sets, that it could be a telephone line problem. In the later case contact your telco provider.

According to the instruction manual, which can be found at: http://telephones.att.com/docMgt/public/art/175/1872_manual.pdf,

TO RECORD AN ANNOUNCEMENT:
1. Press A.
2. Choose the announcement location by
pressing s until the appropriate
mailbox is displayed.
3. Press R. Begin speaking after the beep
4. When you are finished, press S.
You will hear your new announcement.
5. Repeat Steps 1-4 to record another
announcement
— OR —
Press S.

TO REVIEW YOUR ANNOUNCEMENT:
1. Press A.
2. Press s to choose the announcement
you want to review (A, B, C, AO,
MBOX 3, MBOX 4).
3. Press P to hear the selected
announcement.

Or, if you're away from the office,
CHANGING ANNOUNCEMENTS:
You can re-record any of the announcements
currently in use by any
line or mailbox.
1. Contact the answering system.
2. After two beeps press a number key
(1-4) to select a line or mailbox, then
press 4*. The system beeps and begins
recording.
3. Speak into the telephone in a normal tone
of voice.
4. Press # when you are finished. The
system beeps once and plays the new
announcement.
To review your announcement, press a
number key (1-4) to select a line or mailbox.
Press 41 after the two beeps to play
your announcement.
NOTE: If announcement is being used by
both lines, re-recording the announcement
will change the announcement heard on
both lines.

Hope this helps!
tkhusa420

1 Press Annc.
2 Choose the announcement location by
pressing select until the appropriate
mailbox is displayed.
3 Press Record. Begin speaking after the
beep.
4 When you are finished, press Stop.
You will hear your new announcement.
5 Repeat Steps 1-4 to record another
announcement
— OR —
Press Stop

I recommend that you google directory card for Lucent AT&T 1872 phone. This should take you straight to what you need. You may have to pay a price for it but at least you will have what you need.

Unfortunately, there is no way to turn that light off. I had the same situation and researched, called help lines and even had the phone company out to check. The light will stay on. but there is no service to it.

http://www.ask.com/bar?q=manual+for+lucent+phone+1872&page=1&qsrc=0&ab=2&u=http%3A%2F%2Ftelephones.att.com%2Ftelephones_ui%2Fsupport%2Fdsp_manuals_list.cfm

Manual for the 1872
http://www.ask.com/bar?q=manual+for+lucent+phone+1872&page=1&qsrc=0&ab=2&u=http%3A%2F%2Ftelephones.att.com%2Ftelephones_ui%2Fsupport%2Fdsp_manuals_list.cfm

Sorry for such a late reply. I just saw your question.
You can recover deleted messages with the help of USB SIM card reader. For more info, please revert back.

Regards

No you cannot recover a deleted message on an cellphone sorry.

Let me know if this helped :)

It might be your phone connecter outside. That has happened to me numerous times. When water might of got in it or something.

call ur local phone company

let me know :)

First thing I can suggest to try is unplug it and remove the memory battery.

I will look more into this.

Hello,

I don't think so, because some digital system that cannot be recovered except when the unit can be connect to the pc there some instance that can be recovered.

melnavz

Astonishingly, assignment of announcement to phone line is not documented in the user manual. Tech support was totally worthless concerning this issue. I had to discover it by trial and error. To assign an announcement to a specific phone line do the following:
1) Record your announcement message for a, b, c, ao, etc. as documented
2) Press program
3) Keep pressing the feature button until ANNC appear at the bottom of screen, line 1 appears at the top, and the letter 'a' appears in the middle.
4) Choose the announcement to be assigned to Line 1 by pressing the select button
5) Press the feature button again. Line 2 appears in the display.
6) Repeat step 4 to select the announcement to be assigned to Line 2.
7) Press program button, or take phone off-hook to end the sequence.

Shame on AT&T for such shoddy documentation, and lack of support for their products!

See

this page on Fixya.com

for the online user manual and guide.

)You'll need to read the 'RING SELECT/TOLL SAVER' section on the left side of the page.)

Good Luck

On

this page on Fixya.com

you'll find an online user manual and guide that will tell you how to set am / pm (Press * for AM or # for PM)

Follow this link for your manual http://telephones.att.com/docMgt/public/art/175/1872_manual.pdf

Make sure you have adobe reader installed to view.

Hope this helps.

http://pchelpforanyone.blogspot.com