Top 20 NEC Electra Elite DTU 16D-2 Corded Phone Questions & Answers

it has to be setup in PABX programming. Your PABX admin can do this

Hi Fallon, while on the middle of conversation, please check the LCD display of your digital phone, you will see "voice call" then press the button for direct talking.

it depends on your type of phone system. On an Elite IPK system you need to enter program mode from x100 or x101 then goto function 4/18 per port and assign names. transfer key saves. need help remote billable support at www.ldtsnj.com

Hello, That would be a system ring group programming feature. It would depend on the type of phone system you have. NEC Elite 192, Elite IPK, Elite IPK 2. There are different platforms and this would determine how to program it.

1. Press the Function (FNC) button.
2. Press the speed dial button you want to program.
3. Dial the number.
4. Press the Function (FNC) button to set the number.
5. The message Speed Dial Set (SPD SET) displays, indicating that the speed dial button is now programmed.

NEC telephone user guide Thunderbird School of Global Management IT Help

Nec Electra phone reset 1. Login into Voicemail 2. Go to admin Feature 3. Follow the instruction After that your phone will be reset. Nec sv8100 IPK DTerm phones Inlinecom

The system administrator has access to the voice mail part of the system, can go in and select the bin where the message is saved, then re-record it.

You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

I think you have change its internal setting so reset your phone again so its again setup your phone and your problem has been removed like phone ring. Nec sv8100 IPK DTerm phones Inlinecom

Ringing is assigned in system programming, very little chance it was changed by mistake. If Do-Not-Disturb was turned on, that could make a phone stop ringing. If it's just one line on a phone, maybe the system got put in night mode by mistake and night programming isn't identical to day ring. If you have direct access to the phone line check it for dial tone. Often virtual lines are used and you can't check for direct dial tone. On very rare occasion the ringer stops working, which can't be fixed.

From one of the 2 main reception phones, press Feature 80 Feature , on a ProII, an Elite, and an IPK. For the other systems that use this phone you're best off finding the phone that has a night button assigned.

press feature button then 1. little red mic light turns on

Check the line connection or change set

It depends on the system type. some are built in and done through programming. others are connected viz an rca jack on side of the cpu cabinet. post what type of system you have.

Connection problems or hand set complaint

Cancel DND or CALL FORWARD ALL. On an Elite, SPEAKER 42 is cancel code for both, or Feature 60 just cancels DND.

These phones work on about 8 NEC systems, but for a PRO II, an Elite, and an IPK, the standard code is Feature,80, Feature from one of the two main reception extensions. Don't know the code for a 2000, 8100, or IPK II.

Ringing is set up by the system programmer, so talk to the office manager about getting the vendor to do this.

Remove call forwarding to the voicemail pilot extension. Either forward it to somewhere else or don't set any forwarding and it'll just keep ringing.

Is your system in nite mode? Feature 80 Feature toggles from day mode to nite mode on the main reception phone, if you don't have a nite key.