Top 20 NorStar Meridian M7310 Phone Questions & Answers

Just think about it, why would you want to auto dial yourself? You don't need an autodial key for yourself so the system don't allow you to program it.

press feature #65

You would need to change the ccr tree

I guess you want a page key programmed on your set. press feature *3, press a memory key, press feature 610. This key pages all sets when pressed.

Feature #65

Reset voicemail box and when the set up the voicemail on there phone and record there greeting make sure they record there name as well then it will play the extensions recorded name

Set "prime line" to "intercom" in config.

Sounds like bad wiring or connections.

You have what they call a caller id trunk card in your system this could have failed you could try powering down the system to see if that dosen't help wait 2 or 3 min. the power it up.

You need administrative rights to get into the PBX. Once in there, you can assign which phones receive incoming calls. It has been years since I worked on the meridian system, so I can't tell you the way to do it, but it is in the manual. It's not complicated. You can also set it up for DAY/NIGHT mode so that in the evening, if required, all phones could ring on incoming calls so that anyone in the building can answer them.

Press handsfree/mute key.

Have you tried (F)**ADMIN ? What specifically are you trying to do? (F)**CONFIG usually gives access to everything including the lower levels like Admin, Time, etc.

push feature key then star zero don't lift handset this is called botton enquiry. this allows u to push any key and the systyem will identify whats on that key and not disrupt phones.

you probably forwarded the phone, check and see if there's a cancel button or a goodbye button (turns forwarding off on my phone) If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Go to 7310 set you wish yo program leave handset on hook push feature star 3 then the button you wish to program then feature and the code you want ex:feature 0 is speed dial that key will now be programmed for speed dial. You cant program line keys or intercom keys.

Either COPY the config settings from a set where it works to those that don't, or on the sets that do not: F**CONFIG, Terminals&Sets, (enter ext #), ... Telco Features, 1st Display Name: change between Name, Number, or Line. And remember that some callers (esp Cellphones) do not provide Name info, so if the incoming calls at that extension are mostly from the same #s, it might be normal.

Hi Marty, Don't worry about counting your way through. Just log into the system, and you will see Terminals and Sets. Press next until you see System Programming, then press Show. Next until you see Hunt Groups, and press show. You can pick the hunt group you're changing and delete the extension from there. If you're not seeing what we tell you you should see, double check the model of your phone.

DND ,do not disturb, feature 85, or feature *80 to turn it down

Then select a line!!! maybe a button is stuck on your set, jiggle each.

feature * 6