20 Most Recent NorStar Meridian M7310 Phone - Page 3 Questions & Answers

To reset your voice mail password,on press feature 983 the screen should say log:
enter 1020000 (default password) if you have a 3 digit intercom number, 120000 if you have a 2 digit intercom number
the display should say mbox, AA, and othr above the three soft keys
press the mbox soft key
the screen should say add, del, and chng above the soft keys
press the chng soft key
enter in the mailbox number you wish to reset the password on
press ok
the screen should say reset and next above the soft keys
press the reset soft key
press the Rls key
your password should be reset to 0000

I agree with Dan. Power cycle to clear hung ports. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

Is this problem occurring with one phone or all phones connected to the system? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

First, lets get rid of the static. Try Feature #86. This will turn off background music. When a music source is not attached you get static.Enter programming by using Feature XXX66344 password 266344. The display should show "Terminals&Sets" press the top right button with an indicator in the display. The display should show "Show set: ____ enter the extension number that you want to check or program. The display will show ***:name. Press the top right button three times. The display will show Show Line:____ with options to Scan or List. If you select Scan it will show the lines assigned to that phone. If you select List it will start with the first line in your phone system showing one of four states 1- Unassigned, 2- Ring Only, 3- Appear&Ring, 4- Appear only. Change the selection on the line by using the CHNG soft button. This is where line assignments are changed from the four states for each extension. The only other thing that will keep an extension from ringing is "Do Not Disturb" or DND. Feature 85 and #85 will turn this feature on and Off.

Yes, set the paging group to none in programming.

Check programming restrictions for that extension.

Try Feature 65 or #65.

Sound like a sticky button.

This is most likely done in the CCR programming. Someone that is knowledgeable in making changes to the trees needs to make these changes.

If the system did not come back when power was restored call your phone vendor.

On each phone, press Feature *1 and the OK soft key. This will clear the button.

If you mean DND, it is Feature #85. If you mean something else, I need more information. Normally a feature can be turned off using a # before the number. If it is programmed to a button just pressing the button will toggle it on and off.

Check for a stuck button in the top 12 buttons.

This message means that the system does not see a telephone connected to that extension. Check the extension that you are calling to see if it is operational. Check the extension number by using Feature *0 and pressing the intercom button.