20 Most Recent
NorStar Nortel Aastra B0240402 Phone Ash M5208 24 x 2 LCD display MADN-capable(B0240402, M-5208, M 5208, 52... - Page 4 Questions & Answers
Display too faint
It is probably made that way, but if it wasn't like that out of the box first plugged in, than there should be a button to make it brighter. (or it might just be you...)
I need to find out what someone's direct line is.
This would depend on if the line is a stand alone line only being assigned to one extension or on a PRI having DID service. Do a Feature *0 and check the line buttons. It will show the line number or target line number. With this information you can check it in one of two ways. If it is a stand alone line and provided a line number, access the line by pressing the line and dialing your cell phone to get the Caller ID information. If it associated with a PRI having DID service, you will have to check the target line information in programming. A system administrator or vendor needs to do this.
Can only dial long distance on line #3. Lines 1 &
The lines have been restricted in the phone system for some reason that might not be needed anymore. Check with your Phone System Administrator. A system vendor can make these changes or an administrator with programming knowledge.
M7208
The only way a password will stay with a phone is if the "Extension Relocate" feature is turned on. This means that when the phone is moved from one desk to another it retains the same extension number. To verify this do a Feature *0 and press the intercom button to view your extension. Now move the phone to another desk and repeat the process.
Passwords are related to the voice mailbox and there are verbal commands using the dial pad to make any changes. Usually 1 is for yes and two for no or 1 to change and 2 to accept. Not knowing which voice mail system your have it is hard to give anymore detail.
Swap M7310 for T7316e? We have M7310 Phones and
Most likely you can swap the phones. On older systems it might not work so I would try one first. You do gain extra buttons which can be programmed as desired. Any buttons you had on your M7310 would be on the T7316e. You can check the buttons by pressing Feature *0 this will allow you to check any button on the phone.
Nortel/Norstar ICS phone system - Calls go to
Check the forward no answer setting for number of rings on each extension that has ringing lines. The number of rings should be more than the auto attendant is set to answer with.
Changing time on my phone
Feature **8463 should ask for a password **266344 this should allow you to change the time. Note the time is the same on all phones in the system not just yours.
Not finding what you are looking for?