20 Most Recent
Tylo TS30-01 Control Panel - Page 5 Questions & Answers
Radio cobra 200 gtl n9 transmite ni se mueve la aguja donde le mueve pa transmite
Suena como si pudiera haber un problema con el transmisor de su radio Cobra 200 GTL N9. Es posible que la fuente de alimentaci?n de la radio no est? proporcionando suficiente energ?a al transmisor, o que el transmisor no est? conectado correctamente. Debe verificar la fuente de alimentaci?n para asegurarse de que est? conectada y proporcione el voltaje y la amperaje correctos a la radio. Tambi?n debe verificar todas las conexiones entre el transmisor y la radio, incluidos el cable de antena y el cable del micr?fono. Si las conexiones est?n seguras y la fuente de alimentaci?n funciona correctamente, entonces el problema puede estar con la radio misma y es posible que necesite ser atendida por un profesional.
I have an Arlec PC699GB timer. It is not following the weekly programme which I have set it to do.
It sounds like there may be an issue with the timer itself. Some things you can try include double-checking that the timer is set up correctly and ensuring that the power supply to the timer is stable. You can also try cleaning the contacts on the timer, as dirt or corrosion on the contacts can prevent the timer from functioning properly. If these steps do not help, it is possible that the timer is malfunctioning and may need to be replaced. If you have tried these steps and the timer is still not working as expected, you may want to consider contacting the manufacturer or a professional for further assistance.
Operating instructions for ekco timer
Hi,
It seems like your device is being sold on websites like amazon and ebay. Your best move might be to request the instructions from one of those sellers and ask them to send it to you as an individual product. Otherwise, you might have to reach out the librarian at a local college or technical college to ask if they could provide you the instructions that you're seeking.
Thank you.
Photoelectric Switch E210007. How can I program?
OK, even though the thread is old, I had to add my answer, to clarify things.
Settings:
F = Switch is Off
O = Switch is constantly On (no timer mode)
d = Switch turns On at Dusk, and turns Off at Dawn
1-9 = Switch turns On at Dusk, and turns Off after the number of hours shown in the display
1.-9. = Switch turns On immediately, and turns Off after the number of hours shown in the display
How to program my timer to turn my lights on at 5pm and off at 10pm MODEL YLT-10
This timer is made by Living Solutions. It's best to set the timer prior to plugging it in.
To set current time:
Lift protective cover and set the current time by rotating dial CLOCKWISE until the arrow on the side of dial aligns with the correct time.
Note: Timer dial will rotate COUNTER-CLOCKWISE when operating.
To set timer:
Move timer arms (located around the dial) towards the middle of the dial for the time you would like the timer OFF.
Move the arms towards the outside of the dial for the time you would like the timer ON.
Release protective cover.
Not finding what you are looking for?