20 Most Recent NorStar Meridian M5009 Phone (NT4X35) - Page 4 Questions & Answers


Feature * 0 then press an intercom key.

NorStar Lands... | Answered on Jun 24, 2014


Do you have a dial tone?? Try dialing 9 then number..

NorStar Lands... | Answered on May 13, 2014


It is probably made that way, but if it wasn't like that out of the box first plugged in, than there should be a button to make it brighter. (or it might just be you...)

NorStar Lands... | Answered on Apr 08, 2014


This would depend on if the line is a stand alone line only being assigned to one extension or on a PRI having DID service. Do a Feature *0 and check the line buttons. It will show the line number or target line number. With this information you can check it in one of two ways. If it is a stand alone line and provided a line number, access the line by pressing the line and dialing your cell phone to get the Caller ID information. If it associated with a PRI having DID service, you will have to check the target line information in programming. A system administrator or vendor needs to do this.

NorStar Lands... | Answered on Feb 09, 2014


The lines have been restricted in the phone system for some reason that might not be needed anymore. Check with your Phone System Administrator. A system vendor can make these changes or an administrator with programming knowledge.

NorStar Lands... | Answered on Feb 09, 2014


The only way a password will stay with a phone is if the "Extension Relocate" feature is turned on. This means that when the phone is moved from one desk to another it retains the same extension number. To verify this do a Feature *0 and press the intercom button to view your extension. Now move the phone to another desk and repeat the process.
Passwords are related to the voice mailbox and there are verbal commands using the dial pad to make any changes. Usually 1 is for yes and two for no or 1 to change and 2 to accept. Not knowing which voice mail system your have it is hard to give anymore detail.

NorStar Lands... | Answered on Feb 09, 2014


Most likely you can swap the phones. On older systems it might not work so I would try one first. You do gain extra buttons which can be programmed as desired. Any buttons you had on your M7310 would be on the T7316e. You can check the buttons by pressing Feature *0 this will allow you to check any button on the phone.

NorStar Lands... | Answered on Jan 27, 2014


Not enough information to know what your problem is.

NorStar Lands... | Answered on Jan 27, 2014


This means that all extensions to the call pilot are in use or the call Pilot is locked up. Try again later or power cycle the Call Pilot if it is an external unit.

NorStar Lands... | Answered on Jan 27, 2014


Check the forward no answer setting for number of rings on each extension that has ringing lines. The number of rings should be more than the auto attendant is set to answer with.

NorStar Lands... | Answered on Jan 27, 2014


Feature **8463 should ask for a password **266344 this should allow you to change the time. Note the time is the same on all phones in the system not just yours.

NorStar Lands... | Answered on Jan 27, 2014

Not finding what you are looking for?
NorStar Meridian M5009 Phone (NT4X35) Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

5915 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NorStar Lands Phones

  • NorStar Lands Phones

Most Popular Question

new admin

  • Lands Phones
Loading...