20 Most Recent
Aube Technologies Aube 7-Day Programmable 40-500w Light Timer Switch - Page 7 Questions & Answers
How to program my timer to turn my lights on at 5pm and off at 10pm MODEL YLT-10
This timer is made by Living Solutions. It's best to set the timer prior to plugging it in.
To set current time:
Lift protective cover and set the current time by rotating dial CLOCKWISE until the arrow on the side of dial aligns with the correct time.
Note: Timer dial will rotate COUNTER-CLOCKWISE when operating.
To set timer:
Move timer arms (located around the dial) towards the middle of the dial for the time you would like the timer OFF.
Move the arms towards the outside of the dial for the time you would like the timer ON.
Release protective cover.
Timer on delonghi toaster oven goes for 2 minutes and then stops
Hi,
Please press the start/stop button to reset the oven and then attempt to set and run your timer again for a length of more than 2 minutes.
If the issue occurs again, please reference the troubleshooting section of your product manual in order to overcome this.
Thank you.
How to set a Kes load control timer model ISG1201
The Geyser Load Control Timer, ISG1201, is designed to prevent geyser from operating during the Eskom's designated weekly morning and evening peak times. The ISG1201 features 4 easily selectable, pre-programmed, geysers "ON" operating profiles to ensure maximum comfort whilst not burdening the user with the complicated process of having to program the unit.
The profiles are as follows;
- Program (1) is always "ON"
- Program (2) "ON" after sunset to accommodate solar geysers
- Program (3) "OFF" all the time
- Program (4) savings program - "ON" 6 hours weekdays and 12 hours weekend days
Source:
http://www.kgwanyape.com/solutions/isg1201-geyser-load-control-timer/
Pro logic hayward pool won't shut off pump
The pool timer control needs to be replaced completely. It seems that the timer may work but the relay is perhaps shorted or shunted. It can not be reasonable repaired, thus replacement is the only answer.
Not finding what you are looking for?