20 Most Recent Aube Technologies Aube 7-Day Programmable 40-500w Light Timer Switch - Page 3 Questions & Answers

Ask the cruise ship purser. https://www.google.com/search?q=Grasslin+towers+horn+qm2 ..

Manual

Instruction Insert

OXO https://www.oxo.com > wysiwyg > PDF_Files PDF The clock is set. • To set timer, press any button to enter timer mode. A timer icon will appear on the LCD screen. Press the and buttons to set the timer. 1 page ..

Bondo it there is a wood bondo you could get or just use auto body works fine too

The Sharp Air Conditioner Remote Control CRMC-A310JBEO comes with two timer-related functions: TIMER ON and TIMER OFF. To set the timer on the remote control, press the Timer button, then use the Temp + or Temp - buttons to set the desired time. Wait 3 seconds, then the timer function will be activated. You can turn off either function by setting its timer to "0.0h".

You did not mention the model number. Anyway see this manual. It will help. CJH-PC1000_ENG.indd (cuchenamerica.com)

Did you manage to find one ? Im also looking for a manual for the ET380C. Would appreciate any advice

Try a Power Reset. Disconnect all mains power to it for 15 minutes, press and hold any button for 1 minute. Reconnect the power. If that doesn't fix it, the thermostat has failed and you need a new one. Most have backup batteries that can cause the issue you are seeing, but the manual doesn't mention anything about batteries in the base unit.

Aube Technologies TH132 A/F/AF Owner's Manual

ManualsLib https://www.manualslib.com > ... > Thermostat View and Download Aube Technologies TH132 A/F/AF owner's manual online. Aube Technologies Control Module Owner's Guide. TH132 A/F/AF thermostat pdf manual ... ..

https://www.google.com/search?q=Living+Accents+LED+Big+See+Outdoor+Lighting+set+timer ..

https://sites.google.com/site/dyiu22/home/noma Quoting from web link:

NOMA

125V AC / 60 Hz OUTDOOR DIGITAL BLOCK HEATER TIMER 052-8835-2 Instructions Plug timer into grounded outlet

To Set the Current Time: Press the HOUR button as many times as necessary to advance the display the correct time. Note, the time can only be set in 30 minute intervals. The LED display will display the hour (1-12) and on the half hour a light will illuminate in the upper right corner, next to the number 30. To change from AM to PM toggle 24 times, a dot will illuminate in the lower right corner of the display next to the letters PM.

To Program the Timer: Press the PROGRAM button once, the letter P will flash. Press the HOUR button to set the ON time. Press the HOUR button to set the ON time. Press the PROGRAM button again, the letter E will flash. Press the HOUR button to set the OFF time. Press the PROGRAM button to exit program setting mode. Press the HOUR button to review the ON/OFF setting.

To Connect/Operate the Timer: Plug device in to the timer and turn the device on. To Revise the ON/OFF Setting: Unplug the timer and plug it back in. Repeat the programming steps above. To Override the Timer: Press the PROGRAM button if you want the device to turn on before the preset time, but note the device will turn off at the preset time. For example, if the preset ON/OFF period is 3 pm - 4 pm, users can manually press PROGRAM to turn the device on at 2 PM, the timer will keep running until the preset off time at 4 pm. Suitable for use with outdoor appliances. Raintight when mounted vertically with the receptacle facing downward. Use a three-conductor GFCI protected outlet. Do not immerse in water. DO NOT EXCEED RATED CAPACITY. Not for permanent installation. Do not install or use this product for more than a 90-day period per year.

NOMA Dennis

Yeah thats right

Contact them for a free replacement. But first press and hold the Reset Button on upper right. https://images-na.ssl-images-amazon.com/images/I/71OhENnuRdL.pdf ..

Yes, it does exist. It is an outdoor timer. https://www.canadiantire.ca/en/pdp/noma-indoor-heavy-duty-grounded-timer-2-outlets-0529203p.html https://hydroponics.net/documents-hf/7085_7dayDigitalTimerInstruc.pdf ..

I have just been dealing with the same model of timer. The instructions are a bit "opaque" on this point! There's a tiny button on the right-hand side labelled with an R (for Reset). With the timer plugged in to a live wall outlet, take a ball point pen and press that in for a couple of seconds. You should hear a click and the timer should then show something on the display. You can easily set it up from there following the instructions that came with it. Cheers!

$18 for a new one. They are fully electronic, the Triacs on the boards fail. https://www.google.com/search?q=Defiant+49808 ..

The wiring diagram is here. There is a part called 'soft start' and parts appear to be in stock. In fact all parts but one are in stock. START SOFT SKU TTI-089240020009 In Stock $67.95 https://ridgid.ordertree.com/catalog/partslist/view/group_id/467808/?assembly=WIRING%2BDIAGRAM&assembly_id=57257 https://www.google.com/search?q=Ridgid+R4514+parts ..

No make and model given, or what the timer is controlling, but there is generic timer advice here. https://www.google.com/search?q=Timer+turns+off+before+the+programmed+setting ..

10-30-12Smith's ETU02 timer does not appear on the Smith's manual page:http://www.tlc-direct.co.uk/Technical/DataSheets/Smiths/Index.htmOther sites report this 7-day digital timer is discontinued, but can be replaced with similar timer from local box store locally.Another option is to search following page for same-similar timer that might yield a manual similar to your timer.http://waterheatertimer.org/Woods-timers-and-manuals.html#6-week If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Replace the Hydraulic oil in the log splitter after every 150 hours of use. Take following steps to replace it.

1. Make sure all moving parts stops and the log splitter is unplugged.
2. Unscrew Oil Drain Bolt with Dipstick to remove it.
3. Turn the log splitter on the Support Leg side over an 4 liters capacity container to drain the hydraulic oil off.
4. Turn the log splitter on the the motor side.
5. Refill fresh hydraulic oil at the volume as per the hydraulic oil capacity of a particular model indicated in above specifications table.
6. Clean the surface of Dipstick on the Oil Drain Bolt and put it back into the oil tank while keep the log splitter vertically.
7. Make sure the level of the refilled oil is just between 2 grooves around the Dipstick.
8. Clean the Oil Drain Bolt before thread them back. Make sure they are tightened to avoid leakage before place the log splitter horizontally.

Periodically check oil level to ensure it is between 2 grooves around the Dipstick. Upon Lower oil level, oil refilling is required. Source: http://www.qci.net/files/5_Ton_Log_Splitter_-_USE_THIS_MANUAL.pdf