20 Most Recent
Canon PowerShot SX110 IS Digital Camera - Page 7 Questions & Answers
Card locked
Move the slide switch on the side of the card.
Camera lens wont deploy when camera comes on and
Hello
Thank you for using FixYa for your problem
Your camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras have any user-serviceable parts.
Please rate our solutions and if you still have problems please call back for more ideas to help you
Thanks
Richard Scott
Technical Support
New Zealand
I have downloaded pics before
Do you have iPhoto configured to ignore your camera?
You may also want to connect the camera, then open image capture.
if either of those will see/retrieve from your camera, then it's a good bet the Camera software needs to be updated.I hope this helps and good luck!
How do i reset?
Set the camera setting wheel to "setup".
Scroll to "reset all"
Press it.
Memory card is full
Hi,
You need to move the pictures from your camera to a computer and delete them from your camera. This wil free up your camera card again. I do this each time I have a picture taking session and it keeps my camera free of space for the next use, and also helps me to keep my pictures organized on the computer.
Another option is to take the card to Walmart and have them transfer the images to a CD for you.
Hope this helps...
I can't figure out how to set the self timer from
For the SX 110 IS 9 mp camera: With the camera in picture taking mode, Hold the bottom of the roller dial down at the point closet to the timer icon. Hold it for a couple seconds, then the screen will display the timer settings. Select the setting you want and start taking pictures.
Hi-- my canon SX110 won't switch on properly. it
Try removing and replacing batteries to reset the camera. Ensure that batteries are fully charged.
If that does not clear the problem, then the lens error is usually caused by mechanical faults concerning lens
assembly. This happens because there is dirt inside the lens (sand dust), or one part in the lens assembly is bad or went out of place.
Because of this he lens cannot extend or retract fully, the error is
detected and lens error is returned.
Sometimes this can be fixed
playing with the lens during extraction or retraction to help the lens
asset getting back to normal.
If if does not extend tapping gently the back of the camera, and if it does not retract helping lens back in while turning camera respectively on and off.
More often the camera lens must be disassembled and re-assembled by a technician to fix the problem.
I can't download my pictures to my computer
Have you upgraded your flash card memory recently?
If so, it could be due to a larger/higher speed card in your camera. I've had this problem putting the latest and largest cards in my Canons. Solution is simple: get an extreme card reader and insert your card ...your computer will recognize this...
If this isn't your issue.... as Gilda Radner used to say, "NEVER MIND!"
Not finding what you are looking for?