20 Most Recent Archos Internet Media Tablet MP3 Player - Page 11 Questions & Answers

i am moroccan and i dont knw where is the Rv 500 center .

but u can do it on ur own

try to get to the suppoet area of ur product and download the firmware and the upgrade tool..

and fix ya

Heres the owners manual for you

http://www.archos.com/support/download/manuals/EN_Archos104_v1.pdf

Please rate my solution if it solves your problem

there is a word called synchronization or edit sync... or u can simply download real media player,itz easy to use.. if it supports.. try out

First buy a 2.5" hard drive. Remove the back cover (with a putty knife or something really thin), then follow this guide http://www.youtube.com/watch?v=gk6eMP55rrc

have you tried to reset the ipod

Black spots = damaged screen = not repairable = must replace player

All you can do are the "soft" fixes - reset, repair, restore, format, update, upgrade, etc; but, since black spots are caused by hardware failure rather than software failure, none of these methods will work

Hopefully, you are still under warranty

Make sure your operating system (XP, Vista, Macintosh, etc) is compatible with the Archos. Make sure you installed the installation CD first, before inserting the player. Restart the computer once before inserting the player. If same result, try a different usb port on the same computer or another computer.

If it still doesn't work, then go to the Archos website and see if a firmware upgrade is available for your particular model.

i have the exact same problem same place is craked just happend is it coverd by archos warrenty?
steve

I have not yet solved the problem. I cannot contact Archos as they never recognise my password although I have their confirmation, which they sent when I registered the 605 WiFi. I think it is the USB connection that is the problem. I have tried all the USB ports on my computer with no result. I tried to phone their helpline, but on my landline got a recorded voice saying "The number was barred" and from another landline phone the the reception kept breaking up. Phoning from a mobile got the same poor reception. I am thinking I may have to give up.

Some AV400 models are made with integrated batteries which
are designed to last for the life of the AV400. This means that you will
not have to change them. If, in the exceptional case, the batteries need
changing, this should only be done by an Archos technician.

If your player is dead, it is probably NOT the battery that's the problem.

Here's what you do.
Make sure that you can play one of the sample videos to your TV. Next, stop and go to the home screen.
Next, if your external HD has a powersource, plug that into the wall and the device so that it has power. Next plug the usb cable into the side of the DVR Station. The device screen (or the tv if you are still on tv out) should say, external device connecting. It will show the double browser screen and then just go to the file desired and click on OK. If the device doesnt recgnize and mount the external hd, could be because there is not enough power to the ext. HD or the HD is formatted in somehting other than fat32.

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.

I have the same model with the 8 track player, original manual, and original receipt dated 1975.

Probably nowhere as this is an Amazon / eBay special so made in China. You should be able to go to Windows Settings, - Hardware and tell Winderz to find a compatible driver. https://www.google.com/search?q=VIBE+SOUND+USB+Turntable+Model+VS-2001-USBT+drivers ..

Hi I have a manual (and an IQ Voice organizer that I'm trying to sell). I would happily send you a pdf file of the manual if you contact me. Robert

Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour. Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min. How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .

Questions edited for clarity, full 'make model (what it is)'.Spray the buttons with Electrical Switch Cleaning Fluid Spray. It is an old unit and the contacts are probably dry.https://www.google.com/search?q=CR-06PL..