Top 20 Spark Plugs BR4HS Plug 10/BX #3322 Questions & Answers

guessing this is about NGK Spark Plugs, so moved Category from GPS Devices to NGK Spark Plugs. Please always include 'make model (what it is). Thanks Both are copper core plugs. The V-Power has a grooved tip and plated threads. Both will work, but with both selling for the same price, I'd go with the V-Power. The owners manual calls for a BKR5E-11 but the parts store gave the the "ES" version. Mar. 29, 2017

NGK BKR5ES-11 vs BKRE5-11 [Archive] - MX-5 Miata Forum

..

the rc-se76 is the HT leads not a plug. if it was a plug then no it would be colder as the higher the number the colder it is.

An auto parts store will tell you! advanced auto, autozone etc,

Gap should be 0.80mm

Even my kia spectra has 100 ,000 mile plugs, But I change them every 30 to 40 thousand miles to be safe and the engine runs better. God-Bless! If changing the plugs, put in reccomended ones for your vehicle the originals.

Here you go....

.050"

You people need to start giving more info pertaing to your question. In this case engine size would help. Any their are 3 engines for this vehicle. two of them Are L4 153 2.5 Liter, one is non turbo the other is a Turbo,the Spark Plug gap for both of these engines is .035in The 3rd engine is a V/6 & the gap for this one is .039in to .044in Hope this helps

If it's an 8 valve engine and not the 16 valve: Bosch Spark plugs have a gap of 0.8mm NGK spark plugs need a gap of 0.9mm 16 Valve engines have a 0.9mm gap on each type of spark plug.

NGK BPR5EA-L-11

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u .. U can also get free manuals

The plugs should be set already from the factory. If not they should be set at 1.1mm

7-8mm

it is a process However here is a Youtube video that provides step by step. https://www.youtube.com/watch?v=HrhY-x5z8EU

Plug Gap.054 Torque 28 lbs dry.

Listen up. Whenever you ask an outdoor power equipment question, provide the engine manuf., Model no from engine and serial. (Series sometimes for B&S). If you have all of those B&S will tell you at their web site.

check your owners manuel

looking at the engine bay it looks like you need to fit iriduim plugs on the back row they last longer

The Manual says .044inch, Some plug makers advise not to change there preset gap. Most plug charts recommend the gap for most makes and models.

Here is a link for you !!!!!!!!! Good Luck !!!!!!!!!!!!!!!!!!!!!!!!! https://www.youtube.com/watch?v=lk70oyUEftY