Toshiba DKT-2020 Corded Phone - Answered Questions & Fixed issues

Go to the phone where the message was sent and enter Intercom #409. May have to do it a few times if messages are stacked

I am assuming you want to change the display to read another persons name, or blank. If that is correct:
Press a [DN](labeled intercom on my system) + #621.
That opens edit mode.
an example. My phone reads "MARK 29"
where Mark is the user, 29 the extension. John replaced
Mark, so target is "JOHN 29"
so intercom # 6 2 1 puts me in edit mode
# toggles between alpha/numeric
* moves the cursor, I repeat * until cursor is under M
Hit the 5 key, changes the M to J and moves cursor under the A.
Hit the 6 key, the A changes to M, and the cursor moves to under the R. I hit 0 which changes the M to N. I hit 0 again, the N changes to O.
Hit the 4 key, the R changes to G. Hit 0, G changes to H.
Hit the 6 key, K changes to M. Hit 0, that changes the K to M. Hit 0, M changes to N.
We are done, as the extension number stays the same. Hit spkr key to leave edit mode.
Hope that helps!
# toggles alpha/numeric

Press intercom then volume up or down. Tony 732.720.9369

You would have to go into prog mode. prog 81 is the code for immediate ringing. Tony 732.720.9369

Do not press the conf/transfer key. press the intercom button first. Then press the day key or dial ext number. Tony 732.720.9369

You could reset the mailbox Tony 732.720.9369

In menue there should be a setting for delete all

plug in another phone that is working.. listen for dial tone ..if there is .. Cordless phone 80% change ..faulty.

She may have a standard phone, not all phones come with an answering machine. Maybe she has voicemail with the phone company and calls are getting answered back there after three rings instead of her new machine that answers after five rings. If that's the case she needs to get the phone company to shut off their voicemail so her machine can answer those calls.

Press and hold mic adjust contrast with vol up down while holding mic

please go to http://www.telecom.toshiba.com/ and find the users guide for your telephone you should be able to accomplish this yourself. If not please find a dealer on the same web link

go to http://www.telecom.toshiba.com/ obtain a users guide for a standard station or single line set

you probably could have a nite button on your telephone. Depending on the type of forwarding you set ( there are over 5 different types) you have to select the right one to turn it off. Go to http://www.telecom.toshiba.com/ and view the users guide

go to this website there is a document how to change it. This is a system wide setting

If there is a Dnd butto programmed, it will be located on the top right hand side. By pressing the do not disturb button the ring wil be abbreviated. otherwise it you will have to go into the phone system programming to make that phone not ring.

Please send free brochure for model KX-TG 7874.

No there is no way to do this unless you have called ID and the number isn't blocked.

#6051

call your voice mail and log into mailbox 999.(dial the pilot number possibly 555 or 850 then hit the star key when you hear the greeting) the default security code for mb 999 is 999997.Hit option 8 then listen to the prompts you can reset just the password or the entire mailbox. the new default password will be the mailbox numbe followed by 997. Ex Mialbox 200 new password will be 200997

Hello there, please provide more information on the unit. The unit make as well as the model number. The number dp5015s does not match any documents we have so please confirm the model number. Hoping to hear from you soon.
Thank you for visiting FixYa.