20 Most Recent Stanley Tools Staple/Brad Nail Gun Questions & Answers

Don't effen buy it!!!!!!!!!!!

How do I load and use Stanley E type J nails/ tacs (0-69-708) into my Stanley 69-702 nailgun. I'm led to believe they are compatable

If they are correct and the gun is OK be sure you are holding it firmly to what you are stapling.

There is an oring that is probably broke in half, It is referred to as a purple o ring. You can buy the whole trigger assembly but I think that just replacing the one will get you going. Let me know and I will try and help more

There should be a pusher that is attached to a spring. If the spring broke, or the pusher is missing the staples will not stay in place.

If you can locate a model number on the tool, you go to bostitch.com to find the parts you may need

you can try and go to Stanleytools.com and get to their knowledge base of FAQ or they have a direct way to contact the company for the information you need. I was on their site and have seen better to help the end user.

It should be. It is held together by 7 screws. Generic help and videos https://www.google.com/search?q=Stanley+TRA700+electric+staple+gun+spring+came+out ..

Question edited to add CAPS. 1/2" or 5/8" only. https://support.stanleytools.com/hc/en-us/article_attachments/360012708258 ..

We have a similar answer to this here: https://www.fixya.com/support/t25987938-need_manual_stanley_tra700_elec_staple

Double check your using the correct size staples, there are a lot of different sizes and types out there. I've made that mistake. The most common reason is that it has jammed on a staple. remove the staples and the rod that holds them in place. See if the stapler will work when empty. Keeping you hand away from the trigger arm Carefully look to see if there if a staple jammed in the release slot. Sometimes you can clear jams with a small, flat blade precision screwdriver.

No, the TRE300 will require a wide crown staple. The staples that will work with the TRE300 are the TRC600 series( TRC604T 1/4" TRC605T 5/16" TRC606T 3/8").