20 Most Recent Kohler K-12176-PB Fairfax Single Handle Kitchen Faucet With Side Spray Poli... - Page 2 Questions & Answers

you tube is the video website

Likely needs a new cartridge.

Look up the Kohler 800 number. Their parts have a lifetime warranty and they will gladly send a replacement part.

vise grip

I assume you mean the separate H/C valve body as opposed to single handle(bath/shower). https://www.us.kohler.com/us/Taboret-t-handles/productDetail/product:417141/417141.htm?skuId=341208 There is one O ring just below threads of body.

First, your not going to like the solution. There really is no way to solve this on kohler faucets. Some companies make adapters but as far as I know kohler isn't one of them. Hopefully you can cut a hole in the drywall behind and put it where it should be, if not the marble comes back off.

Pop the cap off the faucet handle and tighten the screw under it.

Try turning it to the left

If this is a tub/ shower valve, you installed the cart. upside down. Reversing it should solve the problem. You might have put it in according to instructions but the hot and cold might have been reversed when the valve was plumbed in.

replaces the tap washer or insert

The bottom half of the handle spins CCW to losses the handle from the body. You can then tighten the screw inside the handle.

There is normally a tag on one of the supply lines.

It takes new valve cartridges and sometime complete valve bodies. Call Kohler, it should be covered by their lifetime warranty. They are very good about service.

#77550 cart #76981 plastic adapt.

Go to thr Kohler website at

http://www.us.kohler.com/wheretobuy/index.jsp

and select the

KOHLER Genuine Parts Dealers

or the Buy Online KOHLER Genuine Parts option

take o ring to home center and find a replacement

located directly underneath handle is a set screw

without knowing what type of equipment (make and model and year installed), it could be quite difficult to give a competent answer to your question.

yes there is an o-ring to prevent leaking

If it is a pull spout there is a screen and or check valve assembly where the hose connects.