20 Most Recent Lexmark X4650 InkJet Printer - Page 4 Questions & Answers

install a new ink toner cartridge

whats error is it showing? cartridge missing or empty?

1. Walk over to the printer and print a test page directly. The procedure for printing a test page will vary from model to model, so you may need to consult the user guide that came with your printer. For most network printers, you can print a test page by navigating the "Information" menu on the control panel and choosing "Print Configuration" from the menu. For many desktop printers, you can print a test page by holding the power button until the page begins to print. If you can print a test page from the printer, but not from the computer, you know there is a communication problem between the printer and the PC.2. Remove the printer cable from the back of your printer and the back of your computer. After the cable has been removed, carefully put the cable back into place, making sure that the printer cable is tight. If your printer uses a parallel cable, be sure that it is fully seated on the back of the printer and on the computer. If you are using a USB cable for your printer, be sure that the tab is fully seated in the computer, and that the square end of the cable is firmly connected to the printer.3. Power down the printer, the restart your computer. Click on the "Start" button and choose "Control Panel" from the menu. Double-click the "Printers and Faxes" icon, locate your printer, right-click on it and choose "Properties" from the menu. Click on the "Print Test Page" button to send a test page to your printer.4. Look at the network card on your network printer to see if there is good communication between the printer and the network. You should see a flashing green light on the network card. If there is no light--or if the light is amber or red--the communication is not happening. To test the network communication, remove the network cable from both the network cable and the network port on the wall, then reseat the cable and check the communication again. If the problem remains, you will need to remove and replace the printer's network card.

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

http://images.lexmark.com/publications/pdfs/2007/3500/mhs/en/d0e10275.html

If your printer suddenly got disconnected from your network, try to move it away from any interference and closer to your router.If the WiFi light is on solid orange then it's totally disconnected from your network. You'll need to reconnect your printer back to your network. Just run the Wireless Configuartion Utility.To access that, on your computer, click on Start > All Programs > Lexmark 3600-4600 Series > Tools > Wireless Configuration Utility.

Are you getting any error msgs when you try to print? It's possible that you have a communication problem. Make sure that your computer and printer is able to talk.Since no details were provided, you can try to uninstall the Lexmark software and download an updated driver online at www.lexmark.com.

If the it's a remanufactured cartridge (not genuine), the printer will not detect the ink in the cartridge.If it's genuine, you might want to give Lexmark's technical support a call to have the cartridge replaced.

remove same paper is in printer please all pces paper and solve the problem

It would be worth a try to insert a different / new cartridge to determine if it's the root cause of the problem. If you're hesitant about buying, try to contact Lexmark Technical Support Center for assistance.

HiCheck the printer PC connection.Check through the paper path for any stuck papers/any obstructions here and remove them.Clear any print queue.Turn the printer off and on.Disconnect the printer completely from PC and unplug it.Reconnect again and turn it on.Try printing now.

For more details on how to setup your Lexmark X4650 printer for faxing, please refer to the User's Guide found on the Lexmark website.Additional info:If you have an answering on the same line as your fax:

To make sure the printer picks up incoming faxes, set Auto Answer to On, and then set the printer to pick up after a greater number of rings than the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.

If you have a voicemail feature associated in the same line as your fax:

Voice mail and fax can share the same telephone line if you subscribe to a distinctive ring service offered by your telephone company. This feature allows you to have multiple telephone numbers on one telephone line. Each telephone number has a designated ring pattern (single ring, double ring, triple ring, or double and triple ring). The different ring patterns let you know which telephone number was dialed, and which device you should use to answer the call.

If you do not have distinctive ring service, then set the printer to receive faxes manually (Auto Answer Off). This setting lets you receive both voice calls and fax calls, but works best if you use voice mail more often. You need to turn off voice mail whenever you are expecting a fax.