20 Most Recent Lexmark X4650 InkJet Printer - Page 2 Questions & Answers

You may download the manual from Owners Manual User Guide for Lexmark X4650 InkJet Printer

Make sure you have a dial tone and note, many fax machines will not send over a Voip line.

Your firewall for the wireless is blocking the port. Go into your firewall settings and add the port from the printer to bypass the router. What operating system do you have? It should be in Control Panel under Security Center.
Let me know.
Ray

not ren

Is the cartridges original Lexmark or compatible cartridges?

Try this

Turn off you printer
remove the cartridges
and try gently moving the ink cartridges carrier from left to right
for about a min.

also you can try to wipe machine oil on the bar that holds the ink cartridge carrier
then put the cartridges back inside the carrier
then turn on you printer
and try to print again
If problem persist

TRY THIS:

turn off your printer
unplug the power cable from the printer
lift you printer and put it in an upside down position
then shake the printer from left to right
see if there's any foreign objects stuck inside the printer

Just Turn the Adapter On and donot have it connected to the printer for an hour, Touch the adapter and let me know if its WARM?

It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... Good Luck!!!!!