20 Most Recent LG 60PG60 60 in. Plasma HDTV - Page 5 Questions & Answers

What makes you think you have defective capacitors?

This model LG set had a really high LED backlight failure but in your case I'd look towards bad caps as we have seen this a few times in our shop, it's the 4 in a bunch close to the connector that goes to the main board that gives issues, you can buy them for a few bucks and solder them in if you have the equipment, however a replacement power supply is quite inexpensive, it's also possible you have main board issues but more likely the power supply.

Hvis TV-en din ikke tar imot signaler til HDMI-inngangen, kan det v?re flere ?rsaker til problemet. Her er noen feils?kingstrinn du kan pr?ve:

1. Kontroller kabeltilkoblingen: S?rg for at HDMI-kabelen er ordentlig tilkoblet b?de TV-en og enheten du pr?ver ? koble til. Pr?v ? koble kabelen til en annen HDMI-port p? TV-en din for ? se om det gj?r en forskjell.
2. Pr?v en annen enhet: Hvis kabelen er tilkoblet riktig, kan problemet v?re med enheten du pr?ver ? koble til. Pr?v ? koble til en annen enhet, for eksempel en spillkonsoll eller en Blu-ray-spiller, og se om du f?r signal.
3. Oppdater TV-programvaren: S?rg for at TV-programvaren er oppdatert til den nyeste versjonen. Du kan sjekke dette i TV-innstillingene. Hvis programvaren ikke er oppdatert, kan det p?virke TV-ens evne til ? gjenkjenne HDMI-signalene.
4. Tilbakestill TV-innstillingene: Pr?v ? tilbakestille TV-en til fabrikkinnstillingene. Dette kan hjelpe hvis det er en programvarefeil som forhindrer TV-en i ? gjenkjenne HDMI-signalene.

Hvis ingen av disse trinnene l?ser problemet, kan det hende du m? kontakte en kvalifisert tekniker for videre feils?king og reparasjon.

If the down arrow button on your LG webOS UK6500AUA TV seems to be stuck, you can try the following steps to troubleshoot the issue:

1. Unplug the TV from the power outlet for a few minutes and then plug it back in. This can sometimes reset the TV and fix the issue.
2. Check the buttons on the TV to see if they are physically stuck or damaged. If they are, you may need to get them repaired or replaced.
3. Check the remote control to see if it is sending the down arrow signal continuously. You can test this by removing the batteries from the remote control and seeing if the scrolling stops.
4. Try using a different remote control to see if the issue is with the TV or the remote control.
5. If none of the above steps work, you may need to contact LG customer support for further assistance or schedule a repair for your TV.

1. Check the cables and connections to ensure they are properly plugged in and not loose.
2. Try changing the input source to see if the problem persists.
3. Reset the TV to its factory settings.
4. Try unplugging the TV from the power outlet for a few minutes and then plugging it back in to see if it restarts.
5. Check the contrast and brightness settings on the TV to ensure they are not set to zero or too low.
6. If none of the above steps work, contact a professional technician to diagnose and fix the issue.

1. Turn on your LG TV and ensure it is connected to the same Wi-Fi network as your mobile device or computer.
2. On your mobile device or computer, open the settings menu, and select "Display" or "Screen Mirroring."
3. Select "Screen Share" or "Miracast" from the list of available options. If your device does not have a built-in Miracast feature, you may need to download a Miracast app from the app store.
4. Your LG TV should appear on the list of available devices. Select it to establish a connection.
5. Once connected, your mobile device or computer's screen will be displayed on the LG TV.

Note that the steps may vary slightly depending on the specific model of your LG TV and your mobile device or computer's operating system. If you encounter any issues, you may want to consult the user manual or contact LG customer support for assistance.

I hate to give you bad news but you have panel issues, and the set isn't repairable

• Check the connections: Make sure all the cables connecting your TV to external devices are properly plugged in and secure.
• Adjust the backlight settings: Access the TV's settings menu and look for the backlight settings. Try adjusting the brightness and contrast to see if it affects the picture.
• Check the power supply board: If the TV is not receiving sufficient power, it can cause issues with the backlight. Check the power supply board for any signs of damage or wear, and replace it if necessary.
• Test the backlight: Use a flashlight to shine on the screen and see if there is any image. If there is an image, it is a good indication that the backlight is not functioning properly.
• Replace the backlight: If you have confirmed that the backlight is faulty, it may need to be replaced. This is a more complicated repair and may require professional help.
If none of these steps work, it is possible that the issue is more complex and may require further troubleshooting or repair.

The back light is broken then and also this will happen if there is too much pressure between the panel or and the frame and the back light that has the the display to appear on your TVs screen is , making a warping effect to show up.

This says the board is in stock https://www.reliableparts.ca/product/inv_17066235 or Ask Jimmy, he is the Expert

LG EBT64174309 Main Board for 60UH7700-UB.BUSWLJR

https://www.shopjimmy.com > TV Parts The main board is basically the "brains" of your TV and controls everything, from the audio to video streams. All of the user data and settings are also ... US$134.99

This sounds like a tcon board issue

Record USB with LG RC897T


[email protected]
How can I use my LG RC897T to record on to usb Flash drives ?
LG RC897T I want to record onto USBs now. Which model of electronic item should I buy for the home?

To record on to a USB flash drive using an LG RC897T, you'll need to follow these steps:

Insert the USB flash drive into the USB port on the front of the LG RC897T.

Press the "Menu" button on the remote control and select "Recording" from the main menu.

Select "USB Recording" and then "Start" to begin recording. The recording will be saved on the USB flash drive.

As for purchasing an electronic item for home recording, there are several options available, such as digital voice recorders, video cameras, or even smartphones with recording capabilities. You could also consider purchasing an external audio capture device that can be connected to your RC897T to capture audio directly to your computer. It depends on the quality and format of the recording you're looking to make.

Does the television get a normal picture from cable or over the air signal? It sounds like the television wasn't on the correct Source or Input from the DVD player of VCR.

Just change everything, or take this advice. https://www.fixya.com/support/r29790007-repairing_own_television ..

if not in timer mode then bad power board

Do you have a multimeter and able to pull the back off and get some voltage readings?

The Tcon board is not working or there might be an issue with the back lights and the LCD and the screen for your TV.

If you can see the image as you say its dark that should be backlights are faulty

It sounds like you are experiencing an issue with your Kortek MagicSing YK5000 not connecting to your LG Smart TV via HDMI. Here are a few suggestions for troubleshooting the issue:

1. Check the HDMI cable: Make sure that the HDMI cable is securely plugged into both the Kortek MagicSing YK5000 and the LG Smart TV. Also, check the cable for any damage, such as frayed wires or a broken plug.
2. Check the HDMI input: Make sure that the HDMI input on your LG Smart TV is selected and that the TV is set to the correct input source.
3. Check the TV settings: Make sure that the TV's settings are configured to accept an HDMI input from the Kortek MagicSing YK5000.
4. Check the YPbPr adaptor input: Make sure that the adaptor is securely plugged into both the Kortek MagicSing YK5000 and the LG Smart TV. Also, check that the adaptor is not malfunctioning.
5. Check the TV firmware: Check if there's any firmware updates available for your TV and make sure that it's up to date.
6. Contact the manufacturer: If none of the above solutions work, it may be necessary to contact the manufacturer of the Kortek