Top 20
Motorola Mobility RAZR V3t Cellular Phone Questions & Answers
How to unlock motorola v3
I should first point out that there are other options to unlocking yourself,
1) You can get the unlock code from your provider for free if they are prepared to give it to you. If they are then that is the safest and best option.
2) There are also remote unlocking services - google GSM liberty
3) If you have or know of someone or a store with a smart clip these can be used.
To unlock yourself:
*You need to downgrade your boot loader - this is very risky - no liability is accepted for any problems that may occur*
Ensure your phone is fully charged before starting.
I recommend before beginning you first make a backup of your phone as described in the How To: Use Flashbackup To Backup Your Phone topic in the tutorials section.
This assumes all necessary drivers are already installed.
1) Start in bootloader mode (hold # and * while powering on)
2) Identify your current bootloader (e.g. 8.26 or 7.E0)
3) If you have bootloader 7.D0 already skip to step 6
4) Download and extracthttp://www.poeticfolly.com/motoguide/gurus/unlockit/bl_826-828_to_07d0 _for_V3_by_Archy.V2.shx
5) Use RSD Lite (This program is considered Warez and links are not allowed - search google for it) to flash the file to your phone
6) Download and extract the Moto Unlocker software fromhttp://www.poeticfolly.com/motoguide/gurus/unlockit/Motorola_Unlocker_ 2005.zip
7) Start in bootloader mode (hold # and * while powering on)
8 ) Run Moto Unlocker click connect and yes
PROBLEMS:
If after running motounlocker you still have issues there are two options:
1) Flash an old monsterpack (circa 40.79R), run the unlocker again then flash a recent monsterpack
2) Find P2k Easy Tools cracked version using google
btw I cannot take any credit for this - credit is due here:
http://www.motox.info/showthread.php?p=53127#post53127
and to Scotty2 and Archy for the bootloader downgrade
3/13/2011 6:02:54 AM •
Motorola...
•
187 views • 0 helpful votes
Forgot phone unlock code
To unlock your phone, you will need the unlock code. Getting the unlock codes for these phones are not free, it will cost you a token to get the unlock code. I will advice you click on the link below then follow the rest of the information to be able to unlock your phone.
http://www.unlocking4u.com/supported-phones/rs6wp7/
Click on the link or copy the url and paste in your web browser and follow the instruction from there on. You will get the unlock code of your phone from there.
Hope this was helpful. Thanks for using fixya.
1/27/2011 12:51:02 AM •
Motorola...
•
130 views • 0 helpful votes
My screen is blacked out on my razr v3t gsm!
You cannot access the screen once htis happens. You need to contact your phone company and tell them what is going on so you can get a replacement phone because this is a matter of the wires having been split in your screen. I wish you the best of luck!
3/18/2009 8:17:12 PM •
Motorola...
•
200 views • 1 helpful votes
Holding a charge
Their website says only 6 hours of talk time for that battery. Could be that's all your gonna get from it. Every phone I've ever owned has needed to be recharged every other day and sooner if it's used more.
12/22/2008 5:43:11 PM •
Motorola...
•
138 views • 0 helpful votes
Help
clean the usb connector of ur phone using a brush amedical alcohol.
12/7/2008 5:12:30 PM •
Motorola...
•
184 views • 0 helpful votes
Deleted bluetooth out of phone
If you're talking about a headset pairing, the default password is usually 0000, or 1111.
If it is not a headset, let me know what you are trying to pair back up to your phone.
Please don't forget to rate.
10/2/2008 1:37:34 PM •
Motorola...
•
74 views • 0 helpful votes
How to transfer photos from cannon d20 to computer?
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa (
http://picasa.google.com ).
7/9/2014 5:16:53 PM •
Motorola...
•
462 views • 0 helpful votes
My schrin is upside down
All astronomical telescopes show the view upside down (and some have right/left inversion too) For terrestrial views, a erect image adapter is available but NOT recommended for astronomy as they reduce contrast.
12/15/2011 3:32:02 PM •
Motorola...
•
72 views • 0 helpful votes
Sim Network Unlock Pin Motorola
How to enter my Unlock Code on Motorola ?
Model : All Motorola
1 - Switch ON your phone with a not allowed SIM Card,
2 - Phone show "Enter Special Code",
3 - You can now enter the Unlock Code we send to you.
WARNING : If one of theses messages appear :
- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'
It's because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message "Enter Code Special" will appear again !
https://www.unlockbase.com/faq/en/Q_47.html
I had a paper jam in this model: DM72C and I cleaned all the paper out but it won't start shredding again even though all the power lights are on and ready. What am I missing?
You were asked questions? I have been campaigning for this for 3 months. I told them you need a pop-up
All questions need 'make model (what it is)' as first 3 words.
You are missing the
maker, but you do mention 'shredding'.
Then I also said
'There are 40,000 categories to choose from'.
You chose
'Cell Phones'.
and it's not a 'memo', it's a question. :>)
So, first of all, disconnect it from the mains for 30 minutes. If you jammed it, you were working it hard, and when it jams, heat builds up in the motor and trips the thermal protection device. They have a thermal cut out, some have a thermal fuse what need physically replacing, but most reset when they cool.
Does it work in reverse? A jam can sometimes damage the switch in the throat of the shredder, some are a mechanical switch, some are an infra-red sensor.
https://www.google.com/search?q=DM72C
..
4/23/2024 11:25:22 PM •
Cell Phones
•
18 views • 0 helpful votes
GPX Media Player model MT851B. My touchscreen doesn't respond on it. How do I fix it
There doesn't seem to be anything online to suggest how to do a reset or recalibrate the screen.
You could try three things
Look for a tiny Reset hole in the back.
Connect it to a computer and in Windows Explorer see if the is any useful right click commands?
Or leave it running until it runs out of power, wait 24 hours before recharging.
..
4/8/2024 10:33:38 PM •
Cell Phones
•
21 views • 0 helpful votes
How to shut off MNTR button on Executech phone
To disable or turn off the MNTR (Monitor) feature on an Executech phone: 1. Find the "MNTR" or "Monitor" button on the keypad or console of your phone.
2. Press the MNTR button once to activate the monitor function, allowing you to listen to a call without being heard.
3. Press the MNTR button again to deactivate the monitor function. This should turn the monitor off.
4/2/2024 1:15:53 PM •
Cell Phones
•
23 views • 0 helpful votes
Not finding what you are looking for?