Jacuzzi Signa 6 Whirlpool JAC-B540... - Answered Questions & Fixed issues


possibly some seals deteriorating.. check pump and connections..

Jacuzzi Signa 6... | Answered on Aug 02, 2010 | 117 views


A flashing “FL1” display means the flow switch is
malfunctioning open, the filter cartridge is excessively
dirty or an “air lock” condition has occurred at the
circulation pump intake.

Jacuzzi Signa 6... | Answered on Apr 14, 2010 | 2,963 views


they work on a air switch the hose might not be hooked up on one end

Jacuzzi Signa 6... | Answered on Feb 15, 2010 | 299 views


If there is room most definitely you can place the faucets on the tub itself. You can mount them on the left rear. However be very careful drilling the holes and make sure you have it aligned correctly before drilling. Check underneath to make sure there is enough room for clearance and hook up. Here is what it will look like. a1da3ad.png

Jacuzzi Signa 6... | Answered on Jan 08, 2010 | 558 views


Sounds like the hoses to the jets are the pump are breaking down and pieces coming off. Replace the bad hoze(s).

Jacuzzi Signa 6... | Answered on Feb 13, 2009 | 286 views


hi there. FIrst of all be sure the water lever is above all of the jets for it to work properly. REgarding the jet where the water does not come out properly i am not sure what that means. BUT, the jet is adjustable so turn it and see if that fixes the problem. good luck.

Jacuzzi Signa 6... | Answered on Jan 26, 2009 | 233 views


You are on the right track. Be sure and chlorinate and run the jets at the same time I would let it set for at least a couple of hours running the jet intermittantly and then drain and repeat.
Sound like you have Iron Bacteria. You may want ot contact a water profeessional who can recommend ways of getting rid of the iron.
Properly Chlorinating your well would be a good first step.
What part of the country are you in>

sanray

Jacuzzi Signa 6... | Answered on Apr 11, 2009 | 236 views


Many time leaks around pumps are a simple o-ring that needs to be cleaned and/or tightened. If the jets are leaking from the back side then the jet will have to be removed and resealed.


Good Luck, Phil

Jacuzzi Signa 6... | Answered on Dec 11, 2008 | 313 views


There may be a video but you should be able to tell by looking at it too

big screw under tank holds valve on




big screw under tank holds valve on
toilet-dual-steelwire-drive-flush-valve-a2312-p2302-[1]-zgzkf31tgqefbd1nldh0nf0r-3-1.jpg



see:
https://reviewmotors.co/jacuzzi-dual-flush-toilet-repair-parts

Jacuzzi Home | Answered 2 days ago | 19 views


If there is power to the unit, most likely it will need to be replaced. Check for reset button, and check the fuses before replacing the unit.

Jacuzzi Home | Answered on May 23, 2019 | 25 views


Should be one on the motor and also check to see if there is a GFCi somewhere too. Could be around where the jacuzzi switch is.

Jacuzzi Home | Answered on Feb 10, 2019 | 75 views


search google

Jacuzzi Home | Answered on Dec 07, 2018 | 99 views


try moving by hand they are calcified

Jacuzzi Home | Answered on Nov 04, 2018 | 81 views


the motor could be seased, can you get to back of motor to see if it's spinning

Jacuzzi Home | Answered on Sep 23, 2018 | 158 views


look online using make and model or check manufacturer site for one

Jacuzzi Home | Answered on Jul 10, 2018 | 53 views

Not finding what you are looking for?
Jacuzzi Signa 6 Whirlpool  JAC-B540... Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

US Parts Center
US Parts Center

Level 3 Expert

719 Answers

Mike

Level 3 Expert

4357 Answers

john h

Level 3 Expert

21069 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...