20 Most Recent Jacuzzi Signa 6 Whirlpool JAC-B540... - Page 2 Questions & Answers


Should be one on the motor and also check to see if there is a GFCi somewhere too. Could be around where the jacuzzi switch is.

Jacuzzi Home | Answered on Feb 10, 2019


try moving by hand they are calcified

Jacuzzi Home | Answered on Nov 04, 2018


the motor could be seased, can you get to back of motor to see if it's spinning

Jacuzzi Home | Answered on Sep 23, 2018


look online using make and model or check manufacturer site for one

Jacuzzi Home | Answered on Jul 10, 2018


either turn on pump or fix recirculation pump

Jacuzzi Home | Answered on May 18, 2018


recirculation pump not working replace

Jacuzzi Home | Answered on May 02, 2018


Hi,
Have a look at the leaking jet & decide whether it has a screw thread & a nut fitting in place or if it's bonded to the tub.?
If it's held on by a nut, a new gasket will probably suffice.
If it's bonded on, it will need to be very carefully removed.
The mating faces THOROUGHLY cleaned-up & the exactly right kind of adhesive used, to re-bond the jet onto the tub.
Then it needs to be left to properly dry & cure, before you put any water in it.
Best of luck

Jacuzzi Home | Answered on Mar 15, 2018


possible motor seizure, thermal overload or start/run capacitor problems
call in an electrician for a proper diagnosis

Jacuzzi Home | Answered on Jan 30, 2018

Not finding what you are looking for?
Jacuzzi Signa 6 Whirlpool  JAC-B540... Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

US Parts Center
US Parts Center

Level 3 Expert

719 Answers

Mike

Level 3 Expert

4363 Answers

john h

Level 3 Expert

22434 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jacuzzi Home

  • Jacuzzi Home

Most Popular Question

jacuzzi hot tub model j 300 series fl 1

  • Home
Loading...