Craftsman Nailer Kit, Palm Air Driver - Answered Questions & Fixed issues

Must need a cleaning and lube. Or you need a magazine spring.

Almost in most case the o-rings in the valve and/on top of the cilinder in the upper part of the tacker that must be cleaned or replaced if worn or hard and relubricate with some sillicon grease .

oil it all the time

it is good to oil it all the time

check the user manual as some machines will not fire unless the nailer is pressed on the timber.

Your anvil is not returning to the home position to allow the brad to index into the receiver. Try and push the anvil up all the way to the home position. If that works, then you need lubrication, new return spring, etc. All related to the anvil firing.

My Reliant brad gun won't take an 1 1/4" brad. It only goes up to 1 3/16". I have to find more of those myself.

my paslode im90i nail gun uses loads more gas than the calculated nails per gas and is costing me money

You should be able to get the instruction manual from www.searspartsdirect.com just enter in the model # of your kit.

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

/,./,.

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

';]][

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

';';][

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

';'][][\

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

,.//,.

Hi,
You need to use the correct nails...

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

Hi, W/D here.
On the side of the slide that holds the nails will be a tab. If the gun is empty, it will be close to the base of the slide, near the head of the gum. Grasp the tab, and pull it all the way back until it locks in place. Load your nails. Now, near where the tab that you pulled back is locked in place, you will see a (usually) silver button. Pull back slightly on the first tab, then push the button, releasing the lock. Let the slide push the nails into place, and you're ready to go. Place 2 drops of oil daily in the nail gun where the air line connects, then hook up the air line. Fire away!
Here is a link to an exploded diagram of your nail gun. Double click the diagram to enlarge it. On the right side of the page is the link to a free download manual. Enjoy!
http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Nailer-Parts/Model-351183200/0247/0732000?searchedModel=351-18320&blt=
Best regards, --W/D--
Please feel free to rate this carefully hand-crafted solution, made especially for you. Thanks.

You could try to put a little oil in the nail magazine and oil the spring mech. that is supposed to advance the nails automatically. You could also try to clean the nail mag. It might have some schutz jammed in it from the factory.

did you release the spring that advances them

Clean it and oil it according to directions, then put a dab of dielectric grease on top of the spark plug. If this does not work ...Change the spark plug. I found one spark plug that had broken in half and made good contact intermittently which caused the problem you describe

i had the same problem with mine,
the spark unit is held in posistion with either tape or silicon depending on the year, this can come loose in time, when it comes loose it puts stress on the wires that come from the circuit board above.
you can secure the spark unit again that can do it, if not you need to replace the circuit board cost between £25 & £30