20 Most Recent Jet 3 Ultra Power Chair - Page 5 Questions & Answers

will need more information to help, are there any lights showing on the controller when switched on? is free-wheel selected (lever on motor) if it is the chair should be easy to move by pushing? have you checked the leads are all pluged in and the connectors are all connected and firm? and any other thing you might think maybe useful. this is the trouble shooting guide: http://www.pridemobility.com/includes/download.php?f=troubleshooting/INFINFB2045_Jet_3_Ultra_Troubleshooting.pdf it is a link to a direct download of the .PDF file open with any PDF reader like adobe reader. if you have no reader just go to this link: http://www.adobe.com/uk/products/reader.html adobe reader it is free have a look through and see if it helps. if not just respond with more info. hope that helps. regards, mark.

4 Flashes = There is a bad connection on the right motor. Check the right motor connections and wiring harnesses. this is the trouble shooting guide that has the error codes listed http://www.pridemobility.com/includes/download.php?f=troubleshooting/INFINFB2045_Jet_3_Ultra_Troubleshooting.pdf it is a link to a direct download of the .PDF file open with any PDF reader like adobe reader. if you have no reader just go to this link: http://www.adobe.com/uk/products/reader.html adobe reader it is free worth a download for future referance. hope that helps. regards, mark.

it depends on number of lights, this is the trouble shooting guide that has the error codes listed http://www.pridemobility.com/includes/download.php?f=troubleshooting/INFINFB2045_Jet_3_Ultra_Troubleshooting.pdf it is a link to a direct download of the .PDF file open with any PDF reader like adobe reader. if you have no reader just go to this link: http://www.adobe.com/uk/products/reader.html adobe reader it is free example of error code: 10 Flashes = An excessive voltage has been applied to the control system. Check the battery connections. hope that helps. regards, mark.

for that go to invacare tech

\hmm what do u need to know? how to replace battery?if so take seat off then take off shroud and u will see batterys,make a wiring diagram of how batterys are conected before u remove them, good luck

u need both gear boxes replaced or new seals put in them,go to ebay and look for the motors with gear boxes for your specific chair or otherwise u will need to ordor them from a dealer and and have your insurance pay for them

first thig is to jack up front or have someone help u lift the chair on a, box that that will just fit between the tires and then put in gear and take nut and washer off then pull tire off if u bought new tires without the rims u need to take to a tire repair shop and have them put them on for u then replace \

take seat off then take cover off with 4 screws then make a diagram of existing cables then take cables off remove old batterys, then go back with same style batterys making sure they are gel batterys and exact match and reverse the steps above,good luck

that can be caused by several things,low voltage, gearbox has a broken tooth in gear ,or u may need to buy new batterys, have some one check voltage of batterys first, and have them do a load test on batterys also,good luck and if this seems be ok have a dealer tech look at it and tell u what is wrong

please contact a dealer tech,u may have a bad controller it happens

i take it this is a used chair,u just bought someone elses problem,sorry,begin by checking voltage of batterys,after they are charged,then see if if it powers on,if it doesnt,id ask for my money back,or u can hire a tech to look at it and give u a written report on what it will take to fix it

check levers under chair make sure they are engaged,first then turn off power and reboot

sounds like the power is not getting through, check the batteries are they charged? if not there is prob a loose lead or battery needs to be re fitted to be sure they are making proper contact.

Bad controller or charger plugged in.

power lead keeping flashing but will not start

Look online at manufacturers website

Check condition of batteries. Be sure casters and anti-tilt wheels are turning freely. Be sure speed control buttons on keypad are free of crud and are advancing the LEDs.

If you have a GC Controller 8 flashes indicate a control system fault. Check all connections - especially connections to power module and joystick.