Do you have a test meter to check if the power button is working and has continuity?
My advice with a suspected control board is always to get professional diagnosis due to the cost or control boards. It would be a shame to buy one and find it doesn't fix the issue.
..
While the LG AEQ57518210 and LG 5989JA0002Y ice makers may appear similar and have the same adapter, it's important to note that using a different ice maker model than the one specified by the manufacturer can have potential risks and consequences. Refrigerators are designed with specific components, including ice makers, that are tested and engineered to work together as a system. Using a different model ice maker may lead to the following issues:
Compatibility Issues: Even if the adapter fits, there might be compatibility issues between the different ice maker models and your refrigerator. The electrical connections, mounting points, and water supply might not align properly, causing installation difficulties or functionality problems.
Performance and Quality: Ice makers are designed with specific performance and quality standards. Using a different model ice maker might lead to subpar ice production, inconsistent ice quality, or even no ice production at all.
Leakage or Water Damage: Improperly fitted or incompatible ice makers could result in water leakage, which can cause damage to the refrigerator, flooring, or surrounding areas.
Electrical or Wiring Issues: Different ice maker models might have different electrical requirements or wiring configurations. Mismatched electrical connections could lead to electrical problems or even pose safety risks.
Voiding Warranty: If your refrigerator is still under warranty, using non-standard parts like an incompatible ice maker might void the warranty.
Long-Term Reliability: While the initial cost savings might be tempting, using an incompatible ice maker could lead to long-term reliability issues for your refrigerator.
Call for Service. If the compressor is warm, it means it is working. It probably just needs refrigerant gas.
Unlikely to be a relay if on the compressor, but a Start/Run Capacitor.
It is a $2,000 appliance and worthy of repair
https://www.google.com/search?q=Arctic+Wind+Refrigerator++ASXS1207
..l
It could be from the condenser coils are dirty, bad ventilation,not installed correctly,broken or dirty seals for the gaskets, food storage that is not organized.Or the internal parts are broken.Yes it could be possible that your fridge had quit working and you may need to buy a new one.
It could be from a stuck ice bucket.Or the water pressure is in inadequate on the ice water lines.The auger motor is broken.Or clogged water filters. Sometimes it could the switch has not been turned on.
If you have already replaced the water inlet valve and checked the water pressure, there could be a blockage in the water line between the inlet valve and the dispenser. You can try to disconnect the water line from the inlet valve and the dispenser and flush it out with water to clear any blockages.
If this does not resolve the issue, the problem could be with the water dispenser actuator, which controls the flow of water from the dispenser. The actuator may be faulty or may need to be replaced.
Regarding the clip for the inlet valve and water reservoir, you can try contacting LG customer support or a licensed repair technician to see if they have the replacement part available. They may also be able to provide additional troubleshooting steps or guidance to resolve the water dispenser issue.
If your LG refrigerator is only making ice when you open it up and push the inside button, and the complete fridge is not cooling well, there are a few things you can check:
Check the temperature settings: Make sure the temperature settings for the fridge and freezer are set correctly. If the temperature is too high, it can cause the fridge to not cool properly.
Check the air vents: Make sure the air vents inside the fridge and freezer are not blocked by food or other items. Blocked air vents can prevent proper air circulation and cause cooling issues.
Check the door gaskets: Make sure the door gaskets are sealing properly. If there is air leaking through the door gaskets, it can cause the fridge to not cool properly.
Check the condenser coils: Make sure the condenser coils on the back of the fridge are clean and free of dust and debris. Dirty condenser coils can cause the fridge to not cool properly.
As for the error code E 1S or 15, it indicates a problem with the ice maker fan. This fan is responsible for circulating air over the ice maker to prevent frost buildup. If the fan is not working properly, it can cause the ice maker to not make ice or make ice intermittently.
To fix the issue, you may need to replace the ice maker fan. It's recommended to have a professional technician perform this repair to ensure it's done correctly.
It is possible that the issue is with the control panel (display) itself, as you have ordered a replacement. However, before installing the new control panel, you should check the wiring connections and make sure they are secure and not damaged. You should also check the electrical supply to the fridge to ensure that it is functioning properly. If the issue persists after installing the new control panel, you may want to consider calling a professional to diagnose the issue.
The "Er F5" error code on an LG French door refrigerator typically indicates a problem with the freezer fan motor. This could be caused by a number of things, including:
The fan motor is not working correctly
The fan blades are obstructed
The fan motor wiring is damaged or disconnected
To resolve the issue:
Turn off the refrigerator and unplug it.
Remove any obstructions from the fan blades.
Check the fan motor wiring to make sure it's connected securely.
If the wiring is fine, try turning the fan motor by hand to see if it's seized.
If the fan motor is damaged or not working, it may need to be replaced.
If the issue persists after trying these steps, it's recommended to call a professional repair service
why are you adding freon ---if you do not know what your doing around freon [ not like adding to a vehicle ] you can seriously inure you or someone else as well as damaging a unit that may not have needed freon ]-- to add freon to a system you need correct freon -set of gauges -- tap a line valve port --but before you add will need to locate and fix leak --then hook up a vacuum pump --to test fix and get all moisture in lines out must hold at 30 inch vac to boil off moisture if holds for at least 20 to 30 min then can start adding freon then turn on unit and start charging it
The error code dH on your LG refrigerator is indicating a water supply problem. This could be caused by a few different issues:
Clogged or frozen water line: The water line supplying the icemaker and water dispenser may be clogged or frozen. This can prevent water from flowing to the icemaker and dispenser. Check the water line and make sure that it is not clogged or frozen.
Water inlet valve: The water inlet valve that supplies water to the ice maker and dispenser may be faulty or clogged. This can prevent water from flowing to the icemaker and dispenser. You can check the water inlet valve and make sure it is functioning properly or if it is clogged.
Water filter: A clogged water filter can prevent water from flowing to the icemaker and dispenser. If your refrigerator has a water filter, make sure that it is not clogged and has been replaced recently.
Water pressure: If the water pressure is too low, it can prevent water from flowing to the icemaker and dispenser. Make sure that the water pressure in your refrigerator is adequate.
You should first try to check the water line, water inlet valve, water filter, and water pressure. If none of these solutions work, please contact a professional technician or LG customer service to diagnose and fix the problem.