20 Most Recent Clarke Power Products Clarke 130EN Wirefeed Welder - 110 Volts, 130 Amps, Model# WE6523 - Page 5 Questions & Answers

I have a brand new rectifier for a clarke 130 welder new still sealed in plastic bag--is this what you need---look in craigslist,long island for pics

Hi:
No, there is nothing missing there, the machine is a single face 220Volts.
Regards,

The trigger engages a relay that starts the feeder motor. Make sure your trigger is not stuck. Listen for a "click" when you squeeze it. Next, take the side cover off and look at the motor relay. If needed, remove the motor wire from the relay and try it again. My guess is the relay has arched shut. Please let me know how this works out.
Roger

TRANSFORMER NEEDS REPLACING...  IF YOU FIND ONE LET ME KNOW,,,I  NEED ONE TOO FOR A 140EN CLARKE ,,,THX  [email protected]

Hi:

You can use any flowmeter the trick os to take off the original outlet and use a barb hose adapter 1/4" male thread and 3/16" hose barb. You can find all these at your near Praxair store or any other welding store.

If this was useful to you please vote. Thanks.

Hi:

The transformer and pc board are made to work with 110V only, you can't. Sorry.

If this was useful to you, please vote. Thanks.

Hi:

You can standardize your gun consumables by using tweco products which you can find availability at any welding store (like Praxair).
First get rid of current gas nozzle (tip holder) and install a tweco 35-50 gas nozzle.
Second: Contact tip tweco 11-35 (or 30 depending on your wire size)
Last: the nozzle; a tweco 21-50 that includes the insulator if you are using gas, for innershield (no gas) wire, use LINCOLN nozzle KP1939-1.
All items are cheap, you won't spend more than 20 bucks.
That's all.

Follow the link below for web ordering.

http://www.weldingdepot.com/clarke_mig_welders.html

Follow This link and you can order them on-line.

http://www.weldingdepot.com/clarke_mig_welders.html

If this was useful to you please vote. Thanks!

Have you change the gun liner? Change if you haven't done it in the past year.

goggle it

get a good heavy gage extention cord its about 60 DOLLARS YOUR NOT GETING ENOUGH CURRENT TO YOUR WELDER this goes for any welder stay away from cheap extention cords home depot carrys them dont be cheap

You can get the manual on the link below.

http://homepage.ntlworld.com/richard.martin/discovery/MIGPRO90_100E_150TE.pdf

Good Luck please rate 4 thumbs up and please leave a testimonial

powertool.manualsonline.com

Call HTP America at 1-800-872-9353 or go to their E-bay store - usaweld - they have many Clarke parts.

what model is your clarke? i have a 125en which is the exact same welder as a craftsman, you could probably get a new feed motor or other parts for the welder itself from sears, the gun is a tweco style gun same as lincolns, so if you need tips or anything you can get those just about anywhere welder stuff is sold. i hope i helped.