20 Most Recent
Schlage BE365-CAM BE365CAM505 Lifetime Polished Brass Electronic Security K - Page 8 Questions & Answers
How do we adjust an aluminium door?
the door has a cam that has to be adjusted to force the pin up
call a local glass company and ask them where the adjustment is located
there is usually some type of access plat near the bottom of the door frame close to the hingee on the inside close to the bottom
2/8/2023 6:35:41 AM •
Locks &...
•
Answered
on Feb 08, 2023
How do I reset REI Double cable lock
- Locate the reset button, which is usually a small button or lever located near the combination dials.
- Press and hold the reset button while turning the dials to set your new combination. Make sure to remember this new combination!
- Release the reset button and test the new combination to make sure it works.
Please note that the specific location and method for resetting the combination may vary depending on the specific model of REI Double Cable Lock you have.
1/20/2023 10:02:21 AM •
Locks &...
•
Answered
on Jan 20, 2023
Replaced battery, now safe doesn't lock when closed
Is there power on the display? Bad batteries, or incorrectly installed. Or you haven't set the new code which is erased when the batteries come out.
Always do testing with the door open.
'make model (what it is)' in all questions please.
11/16/2022 11:45:32 PM •
Locks &...
•
Answered
on Nov 16, 2022
Security lock and keyless entry
Not all the time but sometimes it is the result of trying to use the door handle too soon. Try a small pull and then a push.
At other times, it is caused by gears wearing out from a handle being frequently pushed down. Try lifting the handle up.
As I don't know the brand or model of the security lock, I'm hard pressed to offer a fix. Sounds like a mechanical issue rather than an electronic one. If so, disassembly is required. Why am I envisioning the door having to be taken off the hinges? Sadly, looks like a job for a locksmith.
11/1/2022 11:59:47 AM •
Locks &...
•
Answered
on Nov 01, 2022
Onity portable programmer not connecting to lock?
Hi,
double check that your door with the lock is closed properly.
Pleas open control panel in order to check connections are set properly. If possible, change to new batteries.
If all else fails, you might have to reprogram the lock.
Thank you.
10/20/2022 5:09:11 PM •
Locks &...
•
Answered
on Oct 20, 2022
Can you use the Saflok HH6 to open a door with a dead internal battery. If so How?
Question moved from Cars and Trucks to Electronic Locks.
Yes you can if you have the System 6000. From the manual.
https://www.dormakaba.com/resource/blob/1073080/98f7febd813735b4c42223cdfc771c76/system-6000-reference-manual-pdf-data.pdf
Emergency Lock Power Supply (ELPS) The Emergency Lock.
Power Supply is used to restore battery power to a lock that has insufficient internal battery power. When inserted into the lock, and inserting a cut valid keycard, a lock with a dead battery can be activated. This capability eliminates the need to forcibly remove a lock from a door because it has lost power. Once the door has been opened, the batteries can be replaced.
Lock Programmer and Interrogator (LPI) Interface Probe / ELPS power override
The Lock Programmer and Interrogator Interface Probe serves as an interface between the LPI Device and the lock. The probe can be used to program locks or to interrogate a lock when it is necessary to obtain a history of the keycards that were used to access the lock. The smartcard probe also allows an emergency override option when a dead battery condition occurs on a lock. Once the door has been opened, the batteries can be replaced.
Video and further help
https://www.google.com/search?q=Saflok+HH6%2C+door+with+dead+battery
..
10/20/2022 4:33:21 PM •
Locks &...
•
Answered
on Oct 20, 2022
Not finding what you are looking for?