20 Most Recent Toro& Electric String Trimmer - Page 5 Questions & Answers

hold down the spooler and twist to the right and pull up on it and samething when you install a new 1hold and twist to the right and your done

Go here....you can download the manual....It's free!
https://homeownersolutions.toro.com/portal/server.pt/community/product_center/225#productDetailsPage

You can remove the bolts that hold on the head, then it will pull off,

Hello. Just pushing it back does not fix it. Cut off the excess and then you should be ok again. J.

Look for a couple small windows on the sides of the center knob that sticks out, push in on these, they are tabs that hold the center knob on, after that the string bobbin should slip right out.

Nothing will do this...what is most likely the problem is either the recoil is going bad or you have the wrong spark plug installed.

If you use this link:

http://manuals.mtdproducts.com/mtd/Public.do?BrandCode=10001

Then type in your model and serial number, You can download your User's manual. Toro is pretty fussy about handing out manuals hence the model number AND serial number are required in their site.

Thanks for using FixYa,

Kelly

There are 2 detent buttons at the cap on the bottom. Press them both and pull.

rebuild carb--clean ,repair or replace float and needle valve in float bowl

Onve you remove the cover the spool should pull straight out. Be careful, there's a spring under the spool that can fly out and get lost. You need that spring to re-assemble.

Hi,
3.2 US fluid ounces for a US gallon and 2.0 Imperial (UK) fluid ounces for an Imperial (UK) gallon.

However check this link to have a detailed knowledge...

http://www.dukesofwindsoar.com/dukes.cgi?do=html&htmlfile=html/ppg_info/gas_mix.html

Let us know if you want something else please accept the solution.
Thank You for contacting fixya.com