Lorraine - Next to the knob, is there may be a spring that you can pull back towards the knob. If so, after you loosen the knob, pull the spring back toward the knob and hold it while turning the base. If that does not do it, blow some compressed air between the two surfaces and then spray some WD 40 into that gap to lubricate the area.

Read full answer

12/6/2013 3:45:31 PM • Dewalt Tools &... • Answered on Dec 06, 2013

0answers

Impact driver will run, but the bit wont spin so basically it doesn't work

Read full answer

Be the first to answer 11/24/2013 8:18:02 PM • Dewalt Tools &... • Posted on Nov 24, 2013 • Be the first to answer

0answers

Have a d15844 dewalt nailer - it's fairly new and

Read full answer

Be the first to answer 10/15/2013 5:22:54 PM • Dewalt Tools &... • Posted on Oct 15, 2013 • Be the first to answer

0answers

Wiring diagram for dewalt dw849

Read full answer

Be the first to answer 10/6/2013 4:32:41 PM • Dewalt Tools &... • Posted on Oct 06, 2013 • Be the first to answer

0answers

Dewalt orbital palm sander d26451. Brake wore out.

Read full answer

Be the first to answer 9/9/2013 7:44:10 PM • Dewalt Tools &... • Posted on Sep 09, 2013 • Be the first to answer

0answers

Stuck bit in a dewalt brushless 20V impact driver

Read full answer

Be the first to answer 9/7/2013 9:37:54 PM • Dewalt Tools &... • Posted on Sep 07, 2013 • Be the first to answer

0answers

SPARKING INSIDE THE BUFFER

Read full answer

Be the first to answer 8/30/2013 2:39:06 PM • Dewalt Tools &... • Posted on Aug 30, 2013 • Be the first to answer

0helpful

1answer

I use Dewalt random orbital sanders regularly

The velcro pads wear out and need to be replaced periodically. You can buy new pads on-line at any Dewalt parts seller.

Read full answer

8/15/2013 6:44:53 PM • Dewalt Tools &... • Answered on Aug 15, 2013

0answers

What number diode d-23 on charger dewalt de9118

Read full answer

Be the first to answer 6/6/2013 3:20:32 PM • Dewalt Tools &... • Posted on Jun 06, 2013 • Be the first to answer

0helpful

1answer

Hitachi planer knives wont turn

check for broken belt or motor failure.

Read full answer

4/25/2013 5:53:38 AM • Dewalt Tools &... • Answered on Apr 25, 2013

0answers

WHERE IS THE BREAKER RESET BUTTON ON DEWALT DW733 planer

Read full answer

Be the first to answer 4/8/2013 4:31:46 AM • Dewalt Tools &... • Posted on Apr 08, 2013 • Be the first to answer

0helpful

1answer

I have a hitachi nr90ae that will not fire. Depress nose and trigger and gets nothing. What's next?

Remove nails and air supply. Firmly depress safety foot against work with trigger depressed and make sure that firing pin is pushed all the way in. If firing pin is being activated by safety foot most likely problem is stuck cylinder or head valve. If the gun has been dropped the cylinder my jam. Remove the head and make sure that the cylinder and or headvalve moves and that the driver is not stuck in place. Good luck

Read full answer

3/19/2013 1:50:47 PM • Dewalt Tools &... • Answered on Mar 19, 2013

0answers