20 Most Recent Jacuzzi MAGNUM FORCE POOL PUMP - TWO SPEED 2 HP 115/230V - Page 7 Questions & Answers

unscrew the housing the old one pulls out and is connected to a air hose

i replaced the jet on my spa, check with you spa dealer for the correct part number.

www.fitness.manualsonline.com or www.manualsfactory.com or www.retrevo.comsincerely. God bless yopu

need more info do you have adequate flow from filter

careful if you have 12 volts you have source voltage need more info

on the gfi box ther eis a red button and a black one..push the red one first then the black one.. it should start up..if it keeps kicking off look for a reason(leaks wet parts etc)

What make and model pump?

Does the jacuzzi pump motor get hot? Check any filters, make sure all valves are set correctly.

FL1 is an open flow switch error. That means you have poor or no flow through heater (air locked,bad, clogged, or scaled circ. pump, clogged filter, ect) or a bad flow switch. I hope this helps =)

bad thermostat or make sure the probe is all the way in so it can get a accurate reading, sometimes the thermistor (probe) can work its way out and not get a reading

Where is the mounting nut? If it is the impeller mounting screw, it has a reverse thread.