20 Most Recent
Troy Bilt Pony 6.5 Hp Rear Tine Tiller - Page 8 Questions & Answers
How do I check hydraulic fluid on a troy built 0 turn LM
Slide the transmission oil drain pan from under the transmission oil filter. Fill the hydrostatic transmission oil filter reservoirs with new hydrostatic transmission oil. Pour the transmission oil into the reservoirs by hand. Fill the oil reservoir to the full line that is embossed on the side of the reservoir tank.
9/7/2020 5:53:52 PM •
Troy Garden
•
Answered
on Sep 07, 2020
My troy-bilt blower/vac is blowing oil out of the
Your oil breather (on the side of the engine opposite the carb) may be malfunctioning/defective allowing the carb to **** oil from it. There is a breather tube that crosses over the top of the cylinder connecting the crankcase( oil) breather to the air filter housing. Check the oil level and the condition of the air filter and esp. the oil breather. It serves the same function as a PCV on a car engine.
7/14/2020 12:36:51 AM •
Troy Garden
•
Answered
on Jul 14, 2020
Blade belt slips. How can I tighten on Troy bilt bronco46"
Remove the belt and check that each pulley spins freely, grease your spindles, sometimes only accessible from underneath the deck. Check that nothing is wrapped around the spindles under the blades. Your belt tensioner spring could be worn out, assuming you have the correct belt installed.
9/25/2019 7:51:48 AM •
Troy Garden
•
Answered
on Sep 25, 2019
Not finding what you are looking for?