20 Most Recent
Troy Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine - Page 8 Questions & Answers
How to adjust tappett on tb110
what is the model number of the engine and size of the engine? turn engine over to top dead center loosen the nut that hold the rocker on turn the star head until it gets the gap you want tighten the lock nut and re gap to be sure it is correct. i think it is going to be .004 on both intake and exhaust but check with a parts store to be sure.you will need you model number off of the engine.
7/24/2021 5:36:13 PM •
Troy Garden
•
Answered
on Jul 24, 2021
How do you reset low oil light on a Troy bill zero turn lawnmower with a 25 horse Kohler motor
I believe that's a Kholer CV25 which uses a simple oil pressure switch and there is no reset. Either there's insufficient oil pressure or the switch has failed or the sensor wire has shorted to a battery negative.
If you experienced this issue with an oil and filter change service, check oil level is proper. If oil level ok , remove spark plugs, remove oil dipstick, and crank engine for 15 seconds. Did light go off while cranking?... if no, wait 30 seconds and repeat. Try up to ten times.
6/26/2021 3:04:24 PM •
Troy Garden
•
Answered
on Jun 26, 2021
Need ignition switch for Troy Bilt 47287
The Troy Bilt part number is 1909323.
No longer manufactured. Suggest you search eBay for a used switch.
It would be possible to replace the original switch with a generic switch OEM-725-0267A but may require relocation for mounting and other wiring modifications.
10/31/2020 5:00:17 PM •
Troy Garden
•
Answered
on Oct 31, 2020
Not finding what you are looking for?