Jeanie Rub Variable Speed Professional Back Massager - Answered Questions & Fixed issues

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.1-800-338-7014

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

There is an adhesive label on top of the unit. Use a single edge razor blade to lift the label from either side (left or right) until the two recessed hex nuts are exposed. You will need a 9mm socket to remove these hex nuts. Be careful as there is a 6mm jam nut at the base of the threaded rod that holds the rod against the top of the motor housing.Once you have removed the two hex nuts, be sure to save the tiny washers in a safe place. Once the handle is off, you might want to mark the black wire that is conected to the white wire to ensure that reassembly enables the proper connections.Once the handle is off, you can take a small pair of needle nose vice grips and squeeze the cord retainer to facilitate the removal of the handle completely after removing the wire nuts.Be sure all wire ends are marked to your approval.The jam nut on the threaded rod needs to be loosened in order to lift the motor housing off of the motor. Use only a drop or two of penetrating oil on the threaded rod. Attach the two hex nnts removed earlier at the top of the threaded rod to create a jam nut at the top, by tightening them together. Holding these with a wrench, use a 6mm open end wrench or tiny vice grips to loosen the jam nut. Be sure the 6mm jam nut freely moves to the top on each side.Remove all hex nuts and the motor housing can be lifted off.Be very careful not to let the motor tirn over or you may lose the springs.

Jeanie Rub Service Information Out-of-Warranty Service

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

Core Products International, Inc.RETURNS DEPARTMENT RA#XXXXX1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

Jeanie Rub Service Information Jeanie Rub Warranty Information Core Products provides a full one-year warranty on all defects in material and workmanship. Any misuse, unauthorized repairs, or product abuses are excluded.

Defective products reported within one year of date of purchase will be replaced or repaired. Call the Customer Service department at Core Products at 800-338-7014 for a return authorization number and to arrange shipping. Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is an adhesive label on the top of the motor.There are two very small hex nuts that hold the handle tight against the motor assembly. You can take a sharp single edge razor blade and lift the adhesive label from the motor on either side, the left or the right just far enough to expose the hex nuts. Use a small 9mm socket to loosen the hex nuts enough to slide the cover out. Retighten the hex nuts. Use a strong glue like Gorilla glue to reattach the label.I sewed some "1-inch" wide elestic straps on each end to the cover to prevent it from sliding....that was over ten years ago and it works great.

There is an adhesive label on the top of the motor.There are two very small hex nuts that hold the handle tight against the motor assembly. You can take a sharp single edge razor blade and lift the adhesive label from the motor on either side, the left or the right just far enough to expose the hex nuts. Use a small 9mm socket to loosen the hex nuts enough to slide the cover out. Retighten the hex nuts. Use a strong glue like Gorilla glue to reattach the label.I sewed some "1-inch" wide elestic straps on each end to the cover to prevent it from sliding....that was over ten years ago and it works great.

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Where to send itAfter you have gotten an RA number from customer service, please send the unit to:

Core Products International, Inc.RETURNS DEPARTMENT RA#XXXXX1505 Parker Ave, PO Box 627Chetek, WI 547281-800-338-7014

Try rotating the pad about half a turn.

no fixya site fixes nothing

Hi ring core product they might b able to help ,,877-249-1251.....cheers

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.1-800-338-7014

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

Most adult and children visit the dentist for regular checkups and cleanings every six months. People at greater risk should have checkups more often.

Remove the old Fitbit from the account Fitbit app Tap Your data in Fitbit. Scroll down, and tap Delete Fitbit from your Google Account. Log in to your Google Account. Under Delete a Google service, tap Fitbit and follow the on-screen instructions.

How do I delete my Fitbit account and service? - Google Help

Google Help https://support.google.com > fitbit > answer

Remove old device for new one

Fitbit Community https://community.fitbit.com > Android-App > td-p Jan 19, 2021 - Hi @Bonnied07 sync and then remove the device from your account. click for directions. You'll want to move that old device out of range of ...

How do I remove Charge 2 from Fitbit account?

Fitbit Community https://community.fitbit.com > td-p About your old Charge 2, you can remove it by following these steps: Open the Fitbit app and tap your profile picture. Tap Charge 2 image: For iOS devices . ..

Question edited for clarity 'make model (what it is). 'Manuel' is the name of a Spanish gentleman, a 'manual' is the book you want. It isn't leaping of the page at me. Try Tan Talk Forums as they have a section for Tan America Beds and also Sunal Parts who does spares and manuals. https://www.google.com/search?q=Tan+America+VIP+Gold+3200+owners+manual ..

Yes it is generally accepted as perfectly safe and I know of a 50 year old and a 71 year old that does it. The 71 year old is a retired doctor. Intermittent fasting is safe for many people, but it's not for everyone. Skipping meals may not be the best way to manage your weight if you're 'with/child* or *feeding. If you have kidney stones, gastroesophageal reflux, diabetes or other medical problems, talk with your doctor before starting intermittent fasting.

Intermittent fasting: What are the benefits? - Mayo Clinic

Mayo Clinic https://www.mayoclinic.org > faq-20441303 https://www.google.com/search?q=Is+intermittent+fasting+safe ..

I have got 3 different chargers for my scooter. It's a Tifgalop T108. The charger light would stay green on the new chargers. My old one was the only one that was charging it. While I was replacing the charging ports, I came to find out that the negative wire is in a different location on the new ports. The negative wire was on number 3 on the old ones and is in number 2 on the new ones. After changing the ports all my new chargers work fine now.

Question edited for clarity and toss in some CAPS. Deleted duplicate post. Refresh page to see your question. Remove the batteries overnight. Press and hold the Set Button for 2 minutes. Replace batteries. https://www.manualslib.com/manual/1084267/Beurer-Bf66.html?page=6#manual https://www.google.com/search?q=beurer+bf66+weight+management+scale+reset ..

Question edited for clarity, but it helps to know WHAT the error message or code is? Try a power reset first * to reset it: Plug your straightener in and hold the power button for about 20 seconds to reset it. Or contact them direct for Support, Warranty or Repair.

Frequently Asked Questions

CROC® Hair Professional https://crocofficial.com > pages > frequently-asked-questi... Most Croc flat irons can be used up to 240v. However, our older units did not have this feature, and we advise that you call our Customer Service Department ... ..

Hello there, "Boots" is a well-known pharmacy chain in the UK, and they have their own line of skincare products. However, "Jill Nowak" does not appear to be directly associated with Boots skincare.If you're looking for information about skincare products from Boots, you might want to explore their own-brand products or specific lines they carry. For personalized skincare advice or recommendations, consider consulting with a dermatologist or skincare specialist who can provide guidance tailored to your specific needs and concerns.