Top 20 Leeson Reversible Electric Motor 3/4 HP Questions & Answers


If it has 9 leads and is a 240/480 volt motor the 1and 7 go to line 1. the 2 and 8 leads go to line 2 and the 3 and 9 leads go to line 3. the 4 5 and 6 leads are hooked together with a wire nut. To reverse rotation simply reverse any 2 of the line leads.. Prairie Dog........

Leeson... | 228 views | 0 helpful votes


It will not run. With only one wire hooked to both leads there is no potential and no place for the current to flow to. electric bruno.

Leeson... | 163 views | 0 helpful votes


check input voltage check to see if its the proper phase check tension on belts, gear, or connection from motor

Leeson... | 318 views | 0 helpful votes


it is possible that the start/run winding is open cicuit or cable connections via the capacitor you mentioned , is it distorted , any sign or leakage . as it is on a stair lift the motor has to be reversed , is the reversing switch intact.

Ian c

Leeson... | 215 views | 0 helpful votes


should be a wiring diagram on the wiring cover.

Leeson... | 493 views | 0 helpful votes


LOADING NAILS
* Disconnect the tool from the power source when loading brad nails * Tilt the tool or lay the tool flat, so the nails will not drop out while loading
*Press lever (A) while pulling slider (B) backwards Place the nail strip into magazine (C) (maximum capacity 100 nails)

Tools & Hardware... | 35 views | 0 helpful votes


Google (amt)(4750)(manual) without parens OR contact AMT directly to request it.

Tools & Hardware... | 40 views | 0 helpful votes


Not familiar with your torch, but does it have a trigger? Possibly goes behind the trigger?

Tools & Hardware... | 26 views | 0 helpful votes


check the power, check the switch, check the bulb. One of those three items is at fault.

Tools & Hardware... | 28 views | 0 helpful votes


Google (calhawk)(1000m/m)(manual) without parens.

Tools & Hardware... | 54 views | 0 helpful votes


the pin that makes contact with and drives the nail is coupled to a piston.either that connect has failed OR the piston is stuck in a bind(probably a faulty o-ring)

Tools & Hardware... | 59 views | 0 helpful votes


You will get all the information on Toolbox & Hardware from here https://toolboxwidget.com. Download your PDF copy today or email us to toolboxwidget@gmail.com for ordering book.

Tools & Hardware... | 61 views | 0 helpful votes


This belt should be mounted so that the overlap trails when the belt sander is used, sometimes these belts will have arrows indicating the direction of rotation but not always. The arrows usually disappear after a bit of use anyway so if you change grits or re-use belts it is good to know which way to run the belt by looking at the join.

Here another fix that has worked for me. Take some ordinary electricians tape and make several laps around the idler pulley on the belt sander. Put more thicknesses near the center of the idler, than the outside. This effectively builds a small crown on the pulley and makes the belt stay centered. Also, always relieve the tension on the belt when not using the sander. The belt can stretch and tracks poorly if this happens.

Tools & Hardware... | 63 views | 0 helpful votes


manufacturer -tool repair shop online search

Tools & Hardware... | 60 views | 0 helpful votes


Best place is to ask at a Canadian Tire. If you can find the part number on the rotor that would help a lot as you can search for that part specifically online or go to local small motor repair centre for the part or it's equivalent.

Tools & Hardware... | 36 views | 0 helpful votes


google SARS contacts. in Africa asking in USA
and on wrong forum moving you out of computer fix to misc.
first hit, OMG., am I MVP of google NOT.
THE AFRICAN IRS.GOV , YOU ARE TOAST.

https://www.sars.gov.za/Contact/Pages/default.aspx

Tools & Hardware... | 44 views | 0 helpful votes

Not finding what you are looking for?
Leeson Reversible Electric Motor 3/4 HP Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Leeson Tools & Hardware - Others Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Brad Brown

Level 3 Expert

18108 Answers

john h

Level 3 Expert

22406 Answers

Are you a Leeson Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Leeson Tools & Hardware - Others

  • Leeson Tools & Hardware - Others

Most Popular Question

boat lift electric moter replaced now

  • Tools & Hardware - Others
Loading...