20 Most Recent
Black & Decker 11A 1 Router - Page 8 Questions & Answers
I need the owners manual for the B&D Router
Go to Dewaltservicenet.com and type in the number exactly as you have it. The next screen will have a blackened background but on the left side look for owners/instruction manual and click on it. You can download it from there. It is 5 pages long. If I have helped you with your request would you please rate this response accordingly and thank you.
Need owners manual for mouse sander
give me the model number and I will try and find or you can go to Dewaltservicenet.com and try that way, let me know and I will try and help more but this is the site I find my manuals at for their tools.
My nail gun when i locate the battery to the gun
Make sure none of the battery contacts in the nail gun aren't bent, broken or missing. Try to rebend them out to make better contact.
Also make sure your battery charger is actually charging the batts as well.
let me know how it goes..
K
I need an owners manual for a Black and Decker
If this is the FS1200RP go to Dewaltservicenet.com and type in the number in the middle of the page towards the bottom and you can download the instruction manual. If you have problems let me know and I will find another source. If I have helped you would you please rate this response accordingly.
What is the proper dept to drive nails
I set my nail guns to drive the nails just flush and then finish it with a nail set if you need to recess them. I find that you can set them deeper but it leaves an ugly mark from the drive hammer that needs to be puttied. The depth of drive will vary depending on the type of wood also. The nail will go in farther on pine versus oak even though the settings didn't change.
Cannot remove attachments
your lock mechanism has worn out
I use a small drill bit towards the end of the rotary tool where
the air fins are and insert the drill into the fins to lock it down
then use the wrench to loosen .
make sure it's unplugged and don't be too forceful
Nails jammed in stapler so I took it apart splitting the halves.
Without knowing the brand and model number, the best I can offer is this: Since your question is listed under "all Black and Decker nail guns", have you tried going to
www.blackanddecker.com and searching for your tool, or contacting their support section on the website? Or try typing your make & model # into a search engine, pick a place that sells parts and ask them to fax or e-mail a copy of the diagram (I have done this before to get diagrams).
How much should good scaffold brick guards cost me?
These should be expensive, but they are nothing of the sort. You can pick up quality scaffold brick guards online for as little as £3.99. I use a company called
BrikGard because they use 100% recycled plastic scaffold brick guards. I like to be as environmentally friendly as possible without compromising quality or increasing the purchase cost too much. Given that their brick guards are so cheap and made from 100% recycled plastic, I feel safe using them. Also, anyone working on-site should consider using a brick guard because it offers that extra layer of peace of mind so you can get focused on the job without worrying about things like falling debris coming down and striking you. For affordable scaffold brick guards, I would check out BrikGard.
Not finding what you are looking for?